Pass Your Cisco 200-301 Exam with Correct 898 Questions and Answers
Latest [Oct 28, 2023] 2023 Realistic Verified 200-301 Dumps
Cisco 200-301 exam is an updated version of the previous CCNA exam, and it includes a new curriculum that covers the latest networking technologies, including wireless, security, and automation. 200-301 exam is designed to test your knowledge and skills in a variety of networking concepts, including network topology, network design, network protocols, and network security.
NEW QUESTION # 49
With REST API, which standard HTTP header tells a server which media type is expected by the client?
- A. Content-Type: application/json; charset=utf-8
- B. Accept-Patch: text/example; charset=utf-8
- C. Accept-Encoding: gzip. deflate
- D. Accept: application/json
Answer: A
NEW QUESTION # 50
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION # 51
Refer to the exhibit.
An IP subnet must be configured on each router that provides enough addresses for the number of assigned hosts and anticipates no more than 10% growth for now hosts. Which configuration script must be used?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 52
A network engineer is configuring a switch so that it is remotely reachable via SSH The engineer has already configured the host name on the router Which additional command must the engineer configure before entering the command to generate the RSA key?
- A. crypto key generate rsa modulus 1024
- B. password password
- C. ip domain-name domain
- D. ip ssh authentication-retries 2
Answer: A
NEW QUESTION # 53
Which switching concept is used to create separate broadcast domains?
- A. CSMA/CD
- B. VTP
- C. STP
- D. VLAN
Answer: D
NEW QUESTION # 54
Refer to the exhibit.
Which password must an engineer use to enter the enable mode?
- A. default
- B. adminadmin123
- C. cisco123
- D. testing 1234
Answer: D
Explanation:
Explanation
If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password serves as the enable password for all VTY sessions -> The "enable secret" will be used first if available, then "enable password" and line password.
NEW QUESTION # 55
Which type of organization should use a collapsed-core architecture?
- A. small and needs to reduce networking costs currently
- B. large and must minimize downtime when hardware fails
- C. large and requires a flexible, scalable network design
- D. small but is expected to grow dramatically in the near future
Answer: B
NEW QUESTION # 56
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION # 57
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION # 58
Refer to the exhibit.
All physical cabling between the two switches is installed. Configure the network connectivity between the switches using the designated VLANs and interfaces.
1. Configure VLAN 100 named Compute and VLAN 200 named Telephony where required for each task.
2. Configure Ethernet0/1 on SW2 to use the existing VLAN named Available.
3. Configure the connection between the switches using access ports.
4. Configure Ethernet0/1 on SW1 using data and voice VLANs.
5. Configure Ethemet0/1 on SW2 so that the Cisco proprietary neighbor discovery protocol is turned off for the designated interface only.
Answer:
Explanation:
Answer as below configuration:
on sw1
enable
conf t
vlan 100
name Compute
vlan 200
name Telephony
int e0/1
switchport voice vlan 200
switchport access vlan 100
int e0/0
switchport mode access
do wr
on sw2
Vlan 99
Name Available
Int e0/1
Switchport access vlan 99
do wr
NEW QUESTION # 59
Drag and Drop Question
Drag and drop the network protocols from the left onto the correct transport services on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 60
What is a characteristic of spine-and-leaf architecture?
- A. It provides greater predictability on STP blocked ports.
- B. It provides variable latency.
- C. Each device is separated by the same number of hops.
- D. Each link between leaf switches allows for higher bandwidth.
Answer: C
NEW QUESTION # 61
What is the purpose of a southbound API in a control based networking architecture?
- A. Facilities communication between the controller and the networking hardware
- B. allows application developers to interact with the network
- C. integrates a controller with other automation and orchestration tools.
- D. Facilities communication between the controller and the applications
Answer: A
Explanation:
Explanation
https://www.ciscopress.com/articles/article.asp?p=2995354&seqNum=2#:~:text=The%20Southbound%20Inter The Southbound Interface In a controller-based network architecture, the controller needs to communicate to the networking devices.
NEW QUESTION # 62
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION # 63
Refer to the exhibit.
Which configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?
- A. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in
- B. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in
- C. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in
- D. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in
Answer: B
NEW QUESTION # 64
Refer to the exhibit. A network engineer started to configure two directly-connected routers as shown. Which command sequence must the engineer configure on R2 so that the two routers become OSPF neighbors?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 65
Refer to the exhibit.
An extended ACL has been configured configuration failed to work as
intended Which two
changes stop outbound traffic on TCP the 10.0.10 0/26 subnet while
still allowing all other traffic? (Choose
two )
- A. The ACL must be configured the Gi0/2 interface inbound on R1
- B. The source and destination IPs must be swapped in ACL 101
- C. Add a "permit ip any any" statement to the begining of ACL 101 for allowed traffic.
- D. Add a "permit ip any any" statement at the end of ACL 101 for allowed traffic
- E. The ACL must be moved to the Gi0/1 interface outbound on R2
Answer: B,D
NEW QUESTION # 66
What is the purpose of traffic shaping?
- A. be a marking mechanism that identifies different flows
- B. to provide fair queuing for buffered flows
- C. to mitigate delays over slow links
- D. to limit the bandwidth that a flow can use to
Answer: C
NEW QUESTION # 67
Drag and drop the AAA functions from the left onto the correct AAA services on the right
Answer:
Explanation:
NEW QUESTION # 68
How does authentication differ from authorization?
- A. Authentication is used to record what resource a user accesses, and authorization is used to determine what resources a user can access
- B. Authentication verifies the identity of a person accessing a network, and authorization determines what resource a user can access.
- C. Authentication is used to verify a person's identity, and authorization is used to create syslog messages for logins.
- D. Authentication is used to determine what resources a user is allowed to access, and authorization is used to track what equipment is allowed access to the network
Answer: B
NEW QUESTION # 69
Refer to Exhibit.
How does SW2 interact with other switches in this VTP domain?
- A. It forwards only the VTP advertisements that it receives on its trunk ports.
- B. It transmits and processes VTP updates from any VTP Clients on the network on its trunk ports
- C. It processes VTP updates from any VTP clients on the network on its access ports.
- D. It receives updates from all VTP servers and forwards all locally configured VLANs out all trunk ports
Answer: A
NEW QUESTION # 70
Refer to the exhibit.
What two conclusions should be made about this configuration? (Choose two )
- A. The spanning-tree mode is Rapid PVST+
- B. The root port is FastEthernet 2/1
- C. The designated port is FastEthernet 2/1
- D. The spanning-tree mode is PVST+
- E. This is a root bridge
Answer: C
NEW QUESTION # 71
Drag and drop the AAA terms from the left onto the description on the right.
Answer:
Explanation:
NEW QUESTION # 72
Which two encoding methods are supported by REST APIs? (Choose two.)
- A. XML
- B. EBCDIC
- C. YAML
- D. SGML
- E. JSON
Answer: A,E
Explanation:
Section: Automation and Programmability
Explanation:
The Application Policy Infrastructure Controller (APIC) REST API is a programmatic interface that uses REST architecture. The API accepts and returns HTTP (not enabled by default) or HTTPS messages that contain JavaScript Object Notation (JSON) or Extensible Markup Language (XML) documents.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/ b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
NEW QUESTION # 73
......
Cisco 200-301 exam is a comprehensive certification exam that covers fundamental networking concepts and technologies. It is a valuable certification for anyone interested in a career in networking or IT, and it provides a solid foundation for advanced certifications. Passing the exam requires a strong understanding of networking concepts, as well as hands-on experience in implementing and troubleshooting networks.
Cisco Certified Network Associate (CCNA) certification is one of the most widely recognized and respected certifications in the IT industry. Cisco Certified Network Associate Exam certification is designed to test the fundamental knowledge and skills required to install, configure, operate, and troubleshoot small to medium-sized enterprise networks. The latest version of the CCNA certification exam is the Cisco 200-301, which was introduced in February 2020.
Get 2023 Updated Free Cisco 200-301 Exam Questions and Answer: https://www.torrentvalid.com/200-301-valid-braindumps-torrent.html
Pass 200-301 Exam Updated 898 Questions: https://drive.google.com/open?id=1yWOjlbXQIt53paNrvEvSXehC-Wr1eTo1