Verified JN0-636 Exam Dumps Q&As - Provide JN0-636 with Correct Answers
Pass Your JN0-636 Dumps Free Latest Juniper Practice Tests
Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is an industry-standard certification that demonstrates a candidate's proficiency in designing and implementing advanced network security solutions using Juniper Networks technologies. It is a valuable certification for network security professionals looking to advance their careers and stay up-to-date with the latest security technologies and best practices.
To pass the JN0-636 certification exam, candidates must demonstrate a deep understanding of Juniper Networks security technologies and their practical applications. JN0-636 exam consists of 65 multiple-choice questions and has a time limit of 120 minutes. Candidates must achieve a minimum score of 65% to pass the exam. Security, Professional (JNCIP-SEC) certification is valid for three years, after which candidates are required to recertify by passing a designated exam or completing a relevant training course.
Earning the JNCIP-SEC certification validates a candidate's skills and knowledge in Juniper Networks security technologies, which is highly valued by employers. It is also a stepping stone towards higher-level certifications, such as the Juniper Networks Certified Security Professional (JNCSP-SEC) and the Juniper Networks Certified Internet Expert Security (JNCIE-SEC) certifications. Overall, the JN0-636 certification exam is an excellent investment for IT professionals who wish to enhance their career prospects in the field of network security.
NEW QUESTION # 42
Exhibit
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
- A. The ETI events are false positives.
- B. The infected host score is globally set above a threat level of 5.
- C. The C&C events are false positives.
- D. The infected host score is globally set bellow a threat level of 5.
Answer: A
NEW QUESTION # 43
The show network-access aaa radius-servers command has been issued to solve authentication issues.
Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (Choose two.)
- A. 200l:DB8:0:f101::2
- B. 192.168.30.188
- C. 192.168.30.190
- D. 192.168.30.191
Answer: B,D
NEW QUESTION # 44
You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the "Policy is out of sync between RE and PFE <SPU-name(s)>." error.
Which command would be used to solve the problem?
- A. restart security-intelligence
- B. request service-deployment
- C. request security polices check
- D. request security polices resync
Answer: D
NEW QUESTION # 45
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS has a reservation for the security flow resource.
- B. The c-1 TSYS has no reservation for the security flow resource.
- C. The c-1 TSYS can use security flow resources up to the system maximum.
- D. The c-1 TSYS cannot use any security flow resources.
Answer: B,D
NEW QUESTION # 46
Referring to the exhibit, which two statements are true? (Choose two.)
- A. External hosts cannot initiate contact.
- B. The configured solution allows IPv4 to IPv6 translation.
- C. The configured solution allows IPv6 to IPv4 translation.
- D. The IPv6 address is invalid.
Answer: C,D
NEW QUESTION # 47
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet is allowed to make an SSH connection.
- B. The packet's destination is to an interface on the SRX Series device.
- C. The packet originated within the Trust zone.
- D. The packet is dropped before making an SSH connection.
- E. The packet's destination is to a server in the DMZ zone.
Answer: B,C,D
NEW QUESTION # 48
Exhibit:
Referring to the exhibit, your company's infrastructure team implemented new printers To make sure that the policy enforcer pushes the updated Ip address list to the SRX.
Which three actions are required to complete the requirement? (Choose three )
- A. Configure server feed URL as https://172.25.10.254/myprinters.
- B. Create a security policy that uses the dynamic address feed to allow access
- C. Configure Security Director to create a C&C feed.
- D. Configure the server feed URL as http://172.25.10.254/myprinters
- E. Configure Security Director to create a dynamic address feed
Answer: B,D,E
Explanation:
Referring to the exhibit, your company's infrastructure team implemented new printers. To make sure that the policy enforcer pushes the updated IP address list to the SRX, you need to perform the following actions:
A) Configure the server feed URL as http://172.25.10.254/myprinters. The server feed URL is the address of the remote server that provides the custom feed data. You need to configure the server feed URL to match the location of the file that contains the IP addresses of the new printers. In this case, the file name is myprinters and the server IP address is 172.25.10.254, so the server feed URL should be http://172.25.10.254/myprinters1.
B) Create a security policy that uses the dynamic address feed to allow access. A security policy is a rule that defines the action to be taken for the traffic that matches the specified criteria, such as source and destination addresses, zones, protocols, ports, and applications. You need to create a security policy that uses the dynamic address feed as the source or destination address to allow access to the new printers. A dynamic address feed is a custom feed that contains a group of IP addresses that can be entered manually or imported from external sources. The dynamic address feed can be used in security policies to either deny or allow traffic based on either source or destination IP criteria2.
C) Configure Security Director to create a dynamic address feed. Security Director is a Junos Space application that enables you to create and manage security policies and objects. You need to configure Security Director to create a dynamic address feed that contains the IP addresses of the new printers. You can create a dynamic address feed by using the local file or the remote file server option. In this case, you should use the remote file server option and specify the server feed URL as http://172.25.10.254/myprinters3.
The other options are incorrect because:
D) Configuring Security Director to create a C&C feed is not required to complete the requirement. A C&C feed is a security intelligence feed that contains the IP addresses of servers that are used by malware or attackers to communicate with infected hosts. The C&C feed is not related to the new printers or the dynamic address feed.
E) Configuring the server feed URL as https://172.25.10.254/myprinters is not required to complete the requirement. The server feed URL can use either the HTTP or the HTTPS protocol, depending on the configuration of the remote server. In this case, the exhibit shows that the remote server is using the HTTP protocol, so the server feed URL should use the same protocol1.
Reference:
Configuring the Server Feed URL
Dynamic Address Overview
Creating Custom Feeds
[Command and Control Feed Overview]
NEW QUESTION # 49
You are asked to ensure that your IPS engine blocks attacks. You must ensure that your system continues to drop additional malicious traffic without additional IPS processing for up to 30 minutes. You must ensure that the SRX Series device does send a notification packet when the traffic is dropped.
Which statement is correct?
- A. Use the Drop Connection action.
- B. Use the IP-Close action.
- C. Use the Drop Packet action.
- D. Use the IP-Block action.
Answer: B
NEW QUESTION # 50
The IPsec VPN on your SRX Series device establishes both the Phase 1 and Phase 2 security associations. Users are able to pass traffic through the VPN. During peak VPN usage times, users complain about decreased performance. Network connections outside of the VPN are not seriously impacted.
Which two actions will resolve the problem? (Choose two.)
- A. Lower the MSS setting in the security flow stanza for IPsec VPNs.
- B. Lower the MTU size on the interface to reduce the likelihood of packet fragmentation.
- C. Verify that the PKI certificate used to establish the VPN is being properly verified using either the CPL or OCSP.
- D. Verify that NAT-T is not disabled in the properties of the phase 1 gateway.
Answer: A,B
NEW QUESTION # 51
What are two valid modes for the Juniper ATP Appliance? (Choose two.)
- A. event collector
- B. core
- C. flow collector
- D. all-in-one
Answer: C,D
NEW QUESTION # 52
Which two statements are correct regarding tenant systems on SRX Series devices? (Choose two.)
- A. All tenant systems share a single routing protocol process.
- B. A maximum of 500 tenant systems can be configured on a physical SRX device.
- C. Each tenant system runs its own instance of the routing protocol process
- D. A maximum of 32 tenant systems can be configured on a physical SRX device.
Answer: B,C
Explanation:
The following statements are true regarding tenant systems on SRX Series devices:
Each tenant system runs its own instance of the routing protocol process. Each tenant system is isolated, and it has its own routing table, interfaces, and security policies.
A maximum of 500 tenant systems can be configured on a physical SRX device. This allows for a high degree of flexibility and scalability, as each tenant system can be configured with its own set of features and security policies.
A maximum of 32 tenant systems can be configured on a physical SRX device and All tenant systems share a single routing protocol process are not correct statements
NEW QUESTION # 53
In an effort to reduce client-server latency transparent mode was enabled an SRX series device.
Which two types of traffic will be permitted in this scenario? (Choose Two )
- A. ARP
- B. Layer 2 non-IP multicast
- C. IPsec
- D. BGP
Answer: A,B
Explanation:
To answer this question, you need to know what transparent mode is and what types of traffic it permits. Transparent mode is a mode of operation for SRX Series devices that provides Layer 2 bridging capabilities with full security services. In transparent mode, the SRX Series device acts as a bridge between two network segments and inspects the packets without modifying the source or destination information in the IP packet header. The SRX Series device does not have an IP address in transparent mode, except for the management interface1. Therefore, the types of traffic that will be permitted in transparent mode are:
A) ARP (Address Resolution Protocol) traffic. ARP is a protocol that maps IP addresses to MAC addresses. ARP traffic is a type of Layer 2 traffic that does not require an IP address on the SRX Series device. ARP traffic is permitted in transparent mode to allow the SRX Series device to learn the MAC addresses of the hosts on the bridged network segments2.
B) Layer 2 non-IP multicast traffic. Layer 2 non-IP multicast traffic is a type of traffic that uses MAC addresses to send data to multiple destinations. Layer 2 non-IP multicast traffic does not require an IP address on the SRX Series device. Layer 2 non-IP multicast traffic is permitted in transparent mode to allow the SRX Series device to forward data to the appropriate destinations on the bridged network segments3.
The other options are incorrect because:
C) BGP (Border Gateway Protocol) traffic. BGP is a protocol that exchanges routing information between autonomous systems. BGP traffic is a type of Layer 3 traffic that requires an IP address on the SRX Series device. BGP traffic is not permitted in transparent mode, because the SRX Series device does not have an IP address in transparent mode, except for the management interface1.
D) IPsec (Internet Protocol Security) traffic. IPsec is a protocol that provides security and encryption for IP packets. IPsec traffic is a type of Layer 3 traffic that requires an IP address on the SRX Series device. IPsec traffic is not permitted in transparent mode, because the SRX Series device does not have an IP address in transparent mode, except for the management interface1.
Reference:
Transparent Mode Overview
ARP Support in Transparent Mode
Layer 2 Non-IP Multicast Traffic Support in Transparent Mode
NEW QUESTION # 54
Exhibit
You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.) A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 55
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. global mode
- B. Layer 3 mode
- C. transparent mode
- D. private mode
Answer: B,C
NEW QUESTION # 56
Which method does an SRX Series device in transparent mode use to learn about unknown devices in a network?
- A. LLDP-MED
- B. packet flooding
- C. RSTP
- D. IGMP snooping
Answer: B
Explanation:
The SRX Series device in transparent mode uses packet flooding to learn about unknown devices in a network. Packet flooding is a process wherein the device sends out packets to every device it knows about or suspects in the network. When the packets are returned, the device can identify and classify the unknown devices in the network.
NEW QUESTION # 57
While troubleshooting security policies, you added the count action. Where do you see the result of this action?
- A. In the show security policies hit-count command output.
- B. In the show firewall log command output.
- C. In the show security policies detail command output.
- D. In the show security flow statistics command output.
Answer: B
NEW QUESTION # 58
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
- B. The data that traverses the ge-0/070 interface is secured by a secure association key.
- C. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- D. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
Answer: A,D
NEW QUESTION # 59
......
Get Top-Rated Juniper JN0-636 Exam Dumps Now: https://www.torrentvalid.com/JN0-636-valid-braindumps-torrent.html
JN0-636 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1EYpLK1YmBySSIVnQwzOT4UdYISFeaLZ_