Use Free DC0-200 Exam Questions that Stimulates Actual EXAM
Get 100% Real DC0-200 Free Online Practice Test
Dell DC0-200 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 70
What does 2 +1 mean in the system specifications for the power subsystem?
- A. The server has two AC inputs that are switched to a single supply to provide redundant AC sources.
- B. The server must have one power supply in order to operate and the two additional power supplies are redundant.
- C. The server must have two power supplies in order to operate and a third power supply is the redundant supply.
- D. The server has two power supplies with one AC input fed to both, providing redundant power supplies.
Answer: C
NEW QUESTION # 71
You are configuring a new PowerEdge 2650 that is running Windows 2000 Server. The system will be in a rack without a keyboard or monitor connected, so you want to turn off keyboard error messages. What should you do?
- A. boot to the Utility P artition, e xecute nokb.com before rebooting
- B. rack the system, as the system will autodetect rack use and disable keyboard error reporting
- C. disable the PS/2 port in Windows 2000 Device Manager and reboot
- D. select the Do Not Report option for the Report Keyboard Errors field in the System Setup Utility
Answer: D
NEW QUESTION # 72
Which two must be included in the setup of SNMP to properly configure it? (Choose two.)
- A. trap destination
- B. community name
- C. Get All operations
- D. NetBEUI
Answer: A,B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 73
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. administrator user
- B. root user
- C. any valid user with root privileges
- D. any valid user
Answer: B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 74
You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
- A. system setup
- B. PERC BIOS
- C. Array Manager
- D. CERC BIOS
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 75
What are four valid event actions in ITA? (Choose four.)
- A. a forward event
- B. an e-mail message
- C. an alert popup
- D. a Windows event log insertion
- E. a page
Answer: B,C,D,E
NEW QUESTION # 76
Which statement is true about using the Save feature of BASP?
- A. It is used to install and configure the Broadcom Ethernet Controller driver.
- B. It saves a configuration as an executable file.
- C. It lets you transfer teaming configurations to other servers.
- D. It is only available in Windows 2000.
Answer: C
NEW QUESTION # 77
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. administrator user
- B. root user
- C. any valid user with root privileges
- D. any valid user
Answer: B,C
NEW QUESTION # 78
What is a dynamic volume as defined by Array Manager?
- A. a volume that resides in the extended partition of a basic disk
- B. a logical volume created from portions of one or more basic disks
- C. a physical disk that has been marked as dynamic by Array Manager
- D. a logical volume that can be created from a dynamic disk
Answer: D
NEW QUESTION # 79
Click the Task button. Place in order the steps necessary to team adapters in a Microsoft Windows Environment.
Answer:
Explanation:
NEW QUESTION # 80
What should you do before removing or reseating the RAID memory?
- A. remove the hard drives
- B. disconnect the RAID key
- C. disconnect the RAID battery
- D. disconnect the RAID cable
Answer: C
NEW QUESTION # 81
Which two operations can be performed with the DSA CD? (Choose two.)
- A. change the Dell Service Tag via the Service Tag Utility
- B. create Windows 2000 driver/utilities diskette(s)
- C. run system diagnostics on your server
- D. create NetWare 5.1/6.0 driver/utilities diskette(s)
Answer: B,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 82
You just added a new Dell PowerEdge server to the network. In order to use Dell OpenManage IT Assistant to manage it, which three steps do you need to take? (Choose three.)
- A. verify the SNMP settings of the new server
- B. ensure that the new server's IP address is in the discovery specified for OpenManage IT
Assistant - C. install Dell OpenManage Managed System applications on the new server
- D. install Dell OpenManage Management Station application on the new server
- E. install Dell OpenManage Remote Access Controller on the new server
Answer: A,B,C
NEW QUESTION # 83
Which two components can be installed in the 0U space found in Dell racks? (Choose two)
- A. Dell PDU
- B. Dell Dual-Power Grid Switch
- C. Dell UPS
- D. Dell flat panel monitor
Answer: A,B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 84
Which OpenManage component is installed on the managed system to allow SNMP alerts to be sent to the management station?
- A. Remote Access Controller
- B. Server Assistant
- C. IT Assistant
- D. S erver Administrator
Answer: D
NEW QUESTION # 85
You have just installed W2K on your server and you cannot get the server to see your local network. What can you do to diagnose network connectivity? (Choose three.)
- A. verify that the server is configured to use DNS
- B. verify that the cable plugged into your server is not a cross-over cable
- C. verify that the subnet address is the same as the rest of the working devices on your LAN
- D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: B,C,D
NEW QUESTION # 86
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server? (Choose three.)
- A. change the boot order
- B. enable the SCSI/RAID controller
- C. change the Asset Tag information
- D. enable or disable all integrated devices in the system
Answer: A,B,D
NEW QUESTION # 87
Which key sequence is used to access the Adaptec PERC BIOS Configuration Utility during boot up?
- A. CTRL + C
- B. CTRL + M
- C. CRTL + A
- D. CTRL + ALT + DEL
Answer: C
NEW QUESTION # 88
What does an improperly seated memory riser card produce?
- A. no POST
- B. no boot
- C. no memory message in POST
- D. ASCII characters on the monitor
Answer: A
NEW QUESTION # 89
What type of security authentication scheme is used by OMSA under Windows 2000?
- A. PAM
- B. NDS
- C. SNMP
- D. NTLM
Answer: D
NEW QUESTION # 90
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. ATF
- B. ALB
- C. SLB
- D. AFT
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 91
You are monitoring 100 servers in your environment using ITA. You want to determine which servers are equipped with a remote access controller and the Array Manager agent, as well as view the physical memory of each server on one screen. How should you view this information from ITA?
- A. go to the ITA Logs tab, select the information you want to view, and click the Refresh button
- B. go to the ITA Inventory view, select the information you want to view, and click the Get Inventory button
- C. go to the ITA Remote Address Book, select the information you want to view, and click the Get Addresses button
- D. go to the ITA Search view, select all the information you want to view using one query, and click the Search button
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 92
......
How much DC0-200 Exam Cost
The price of the DC0-200 exam is $225 USD.
BEST Verified Dell DC0-200 Exam Questions (2024) : https://www.torrentvalid.com/DC0-200-valid-braindumps-torrent.html
The Best Practice Test Preparation for the DC0-200 Certification Exam: https://drive.google.com/open?id=1pKGNqMn87UVRvfBA5zAPwewFZP-3SQVU