Steps Necessary To Pass The NS0-173 Exam from Training Expert TorrentValid
Valid Way To Pass Cisco and NetApp FlexPod's NS0-173 Exam
NEW QUESTION 18
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show flogi database
- B. MDS9148>show fcc
- C. MDS9148>show fcfwd
- D. MDS9148>show fcdomain
Answer: A
NEW QUESTION 19
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. NetApp Technical Report
- B. Cisco Cloud Center documentation
- C. Cisco Validated Design documents
- D. VMware vSAN documentation
Answer: A,C
NEW QUESTION 20
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. MTU configuration
- B. igroup configuration
- C. FC portsets
- D. FC zoning
- E. ALUA settings
Answer: A,B,C
NEW QUESTION 21
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. server port
- B. uplink port
- C. appliance port
- D. monitor port
Answer: B
NEW QUESTION 22
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Traffic is load-balanced within IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
Answer: D
NEW QUESTION 23
A customer wants to configure SAN boot for its FlexPod system. The customer must consider the minimum number of FC ports to be configured on each node in the ONTAP storage solution.
In this scenario, what is the minimum number of FC ports that should be configured per storage node?
- A. three
- B. one
- C. four
- D. two
Answer: A
NEW QUESTION 24
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. SnapVault
- B. SnapMirror
- C. FlexArray
- D. MetroCluster
Answer: D
NEW QUESTION 25
When FCoE is configured in a FlexPod environment, which step is required?
- A. Create a VSAN to support FCoE for the FC uplink.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- D. Create a VSAN within service profiles.
Answer: B
NEW QUESTION 26
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. FlexCache
- B. SnapVault
- C. SnapMirror
- D. SnapRestore
Answer: A,C
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 27
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 2000 Series Fabric Extender
- B. Cisco Nexus 3000 Series switches
- C. Cisco UCS Series Fabric Interconnects
- D. Cisco UCS B-Series servers
- E. Cisco Nexus 9000 Series switches
Answer: C,D,E
NEW QUESTION 28
Click the Exhibit button.
Referring to the exhibit, what is the name given to the link between the two Cisco Nexus switches?
- A. vPC peer connection
- B. vPC Domain ID
- C. vPC peer domain
- D. vPC peer link
Answer: D
NEW QUESTION 29
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- B. a DS224C with twenty-four 3.8 TB SSDs
- C. a two-node FAS8200 with a 4 TB NL-SAS HDD
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: B,C
NEW QUESTION 30
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS 5108 Chassis
- B. Cisco APICs
- C. Cisco USC Nexus Switches
- D. Cisco UCS Fabric Interconnects
- E. NetApp FAS Storage Controllers
Answer: A,D,E
NEW QUESTION 31
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- B. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- C. Traffic is load balanced across the links.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: B,C
NEW QUESTION 32
What are characteristics of the Cisco UCS 5108 blade chassis?
- A. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
- B. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
- C. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth
- D. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
Answer: C
NEW QUESTION 33
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. NetApp
- B. VMware
- C. Red Hat
- D. Cisco
- E. Microsoft
Answer: A,C,D
NEW QUESTION 34
......
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
All NS0-173 Dumps and Cisco and NetApp FlexPod Design Specialist Training Courses: https://www.torrentvalid.com/NS0-173-valid-braindumps-torrent.html