Top Network Appliance NS0-516 Courses Online - Updated [Dec-2021]
NS0-516 Practice Dumps - Verified By TorrentValid Updated 180 Questions
NEW QUESTION 30
Where does the explicit multipath driver reside?
- A. in the controller's memory
- B. on the I/O host
- C. on the storage manager host
- D. host on the storage manager client
Answer: B
NEW QUESTION 31
A customer is experiencing performance issues on their NetApp E-Series system that is running with iSCSI host interface cards (HICs).
In this scenario, in which two locations in the GUI would you go to find detailed statistics for the ISCSI connections on this system? (Choose two.)
- A. Support -> Support Center -> Diagnostics -> View iSCSI Statistics
- B. Support -> Support Resources -> Storage Array Profile
- C. Home -> View Performance Details
- D. Settings -> System -> View ISCSI Statistics
Answer: A,D
NEW QUESTION 32
Which feature used on E-Series controllers enables them to ship I/O to the alternate controller?
- A. AVT
- B. TPGS
- C. RDAC
- D. ALUA
Answer: D
NEW QUESTION 33
What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)
- A. special USB flash drive that must be inserted into the controllers
- B. online database requiring the controllers to access the internet to activate features
- C. simple password system
- D. small toggle switches on the controller boards inside the system
- E. key file obtained from vendor and passed to system via SANtricity
Answer: E
NEW QUESTION 34
What is a NetApp best practice recommendation for the system monitor?
- A. It should run only on one management server connected to the storage system.
- B. It should run on all storage manager clients.
- C. It should run only on Windows server systems.
- D. It should be stopped during a controller firmware upgrade.
Answer: A
NEW QUESTION 35
Which E-Series controller supports 56-Gbps infiniBand HICs?
- A. E2700
- B. DE5600
- C. E5600
- D. DE6600
Answer: C
NEW QUESTION 36
What would be the minimum configuration required to support a drawer-protected 20-drive DDP? (Choose the best answer.)
- A. An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives.
- B. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.
- C. An E2624 with four DE5600 Expansion Chassis, containing a total of 6, 1.6TB SSD and 96, 3T NL-SAS drives.
- D. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives.
Answer: B
NEW QUESTION 37
In the Array Management window, which tab provides access to the Ethernet management port configuration and premium feature enablement?
- A. Configuration
- B. Storage & Copy Services
- C. Hardware
- D. Host Mappings
- E. Setup
Answer: E
NEW QUESTION 38
Which three documents should be provided to the customer after the e-Series installation is complete?
(choose three.)
- A. a document showing available power on the UPS with no equipment connected
- B. a b a document with IMT pages that show the supported host configuration and fabric switches in the solution
- C. a document showing user IDs and passwords for all deployed devices
- D. a document showing the cabinet layout with cabling information and IP addresses being used
- E. a document showing how much space is available for system expansion
Answer: B,C,D
NEW QUESTION 39
How many 32 Gb ports are on one FC host interface card (HIC) on the NetApp E2800, EF280, E5700, and EF570 systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 40
Which statement most accurately describes the benefits of ALUA?
- A. It causes an immediate ownership change of a volume whenever I/O uses an alternate path to the storage system.
- B. It sets the storage system to an active-active LUN access model.
- C. It eliminates the need for zoning of the SAN fabric in a duplex controller configuration.
- D. It ensures that controller ownership for a volume will not change.
Answer: B
NEW QUESTION 41
What four resources have information to determine space and power & cooling requirements for E-Series storage systems? (Choose four.)
- A. Install Guide
- B. Site Prep Guide
- C. E-Series Power & Cooling Calculator
- D. Hardware Universe
- E. Hardware cabling guide
- F. E-Series System Data Sheets
Answer: A,B,C,F
NEW QUESTION 42
Exhibit:
Referring to the exhibit, a customer needs to verify the power draw for the uninterruptible power supply (UPS) that is supporting ten E2824 shelves in a cabinet connected to a 100/110 volts power source.
What is the power draw in amps for the UPS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 43
An E-Series customer can find out when a specific volume was deleted by using the ______. (Choose the best answer.)
- A. Storage Array Profile
- B. Major Event Log
- C. Online Help
- D. Recovery Guru
Answer: D
NEW QUESTION 44
You are adding drives to an existing Dynamic Disk Pool (DDP). In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)
- A. if the drives have a compatible security type
- B. if the drives have the same firmware level
- C. if the drives are the same capacity or larger
- D. if the drives are from the same manufacturer
Answer: A,C
NEW QUESTION 45
What would an E-Series system customer use to determine when a specific volume was deleted?
- A. Storage Array Profile
- B. Online Help
- C. Recovery Guru
- D. Event Log
Answer: D
NEW QUESTION 46
Exhibit:
Referring to the exhibit, which three statements are true? (Choose three)
- A. There are two SAS expansion ports available
- B. There are two FC/iSCSI host ports available
- C. There are two Base-T iSCSI ports available
- D. There are six SAS host ports available
- E. There are four SAS host ports available
Answer: A,B,E
NEW QUESTION 47
What uses the Access Volume? (Choose the best answer.)
- A. XOR parity calculations
- B. Asymmetric Logical Unit
- C. SMagent
- D. Redundancy Check
- E. Legacy operating environments
Answer: C
NEW QUESTION 48
A company implemented Automatic Load Balancing (ALB). When the controller workloads are monitored, it becomes obvious that there is an imbalance and that ALB is not working correctly. In this scenario, what are two causes of the problem? (Choose two)
- A. The company implemented a host multipath driver that does not support AL
- B. The company implemented a host type that does not support ALB
- C. The company implemented a load balancing min-min algorithm that does not support AL
- D. The company implemented an adaptive load balancing agent that does not support AL
Answer: A,B
NEW QUESTION 49
Schedules for AutoSupport's periodic collection of data can be changed in the ________. (Choose the best answer.)
- A. Major Event Log
- B. Array Management Window
- C. NVSRAM
- D. Enterprise Management Window
Answer: D
NEW QUESTION 50
When you arrive on a customer site, you discover that the customer network administrator has called in sick. While required power has been provided and all of the components ordered have been physically accounted for, the network will not be operational today.
Which would be the most useful tool to complete your rack & stack and initial configuration of the system? (Choose the best answer.)
- A. a CD containing the 10.86 version of SANtricity
- B. a Serial Port cable
- C. a standalone switch or hub
- D. None of the above, come back tomorrow.
Answer: A
NEW QUESTION 51
......
New (2021) Network Appliance NS0-516 Exam Dumps: https://www.torrentvalid.com/NS0-516-valid-braindumps-torrent.html
Updated NS0-516 Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=1ueanO6MbbK2ebu6yWgMIUh6T75oF1cAD