Fortinet NSE7_SDW-6.4 Practice Verified Answers - Pass Your Exams For Sure! [2022]
Valid Way To Pass NSE 7 Network Security Architect's NSE7_SDW-6.4 Exam
NEW QUESTION 22
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. FortiGate provides statistics and reading based on historical traffic logs.
- B. The debug output shows per-IP shaper values and real-time readings.
- C. This traffic shaper drops traffic that exceeds the set limits.
- D. Traffic being controlled by the traffic shaper is under 1 Kbps.
Answer: B,C
NEW QUESTION 23
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Both SD-WAN member interfaces have used separate SLA targets.
- B. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- C. Port1 became dead 1ecause no traffic was offload through the egress of port1.
- D. SD-WAN member interfaces are affected by the SLA state of the inactive interface
Answer: B
NEW QUESTION 24
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
- C. London generates an IKE information message that contains the Toronto public IP address
- D. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
Answer: B,D
NEW QUESTION 25
Which two reasons make forward error correction (FEC) ideal to enable in a phase one VPN interface? (Choose two )
- A. FEC is useful to increase speed at which traffic is routed through IPsec tunnels.
- B. FEC improves reliability which overcomes adverse WAN conditions such as noisy links.
- C. FEC transmits additional packets as redundant data to the remote device.
- D. FEC transmits the original payload in full to recover the error in transmission.
- E. FEC reduces the stress on the remote device jitter buffer to reconstruct packet loss
Answer: B,C
NEW QUESTION 26
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two.)
- A. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- B. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- D. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION 27
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Select SD-WAN balancing strategy.
- B. Specify incoming interfaces in SD-WAN rules.
- C. Configure SD-WAN rules interface preference.
- D. Specify outgoing interface routing cost.
Answer: C
NEW QUESTION 28
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. The protected subnets should be set to address object to all (0.0.0.0/0).
- B. On the hub VPN, only the device needs additional phase one settings.
- C. ADVPN should only be enabled on unmanaged FortiGate devices.
- D. Each VPN device has a unique pre-shared key configured separately on phase one.
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 29
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Use unique Diffie Hellman groups on each VPN interface.
- B. Configure the IKE mode to be aggressive mode.
- C. Use different proposals are used between the interfaces.
- D. Specify a unique peer ID for each dial-up VPN interface.
Answer: A,C
NEW QUESTION 30
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. The debug output shows per-lP shaper values and real-time readings.
- B. Traffic being controlled by the traffic shaper is under 1 Kbps
- C. FortiGate provides statistics and readings based on historical traffic logs.
- D. This traffic shaper drops traffic that exceeds the set limits.
Answer: A,C
NEW QUESTION 31
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. VPN static routes are prevented from populating the FortiGate routing table.
- B. There are separate virtual interfaces for each dial-up client.
- C. FortiGate created a single IPsec virtual interface that is shared by all clients.
- D. 100.64.3.1 is one of the remote IP address that comes through index interface 1.
Answer: C,D
NEW QUESTION 32
Which statement about using BGP routes in SD-WAN is true?
- A. Dynamic routing protocols can be used only with non-encrypted traffic
- B. Adding static routes must be enabled on all ADVPN interfaces.
- C. Learned routes can be used as dynamic destinations in SD-WAN rules
- D. VPN topologies must be form using only BGP dynamic routing with SD-WAN
Answer: C
NEW QUESTION 33
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It improves SD-WAN performance on the managed FortiGate devices.
- B. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
- C. It acts as a policy compliance entity to review all managed FortiGate devices.
- D. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
- E. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
Answer: A,C
NEW QUESTION 34
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Dead members require manual administrator access to bring them back alive
- B. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- C. Port2 might become alive when a single response is received from an SLA server
- D. Subnets 100 .64-1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
Answer: B
NEW QUESTION 35
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )
- A. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
- C. London generates an IKE information message that contains the Toronto public IP address
- D. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
Answer: B,D
NEW QUESTION 36
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set cost 15.
- C. Set source 100.64.1.1.
- D. Set load-balance-mode source-ip-ip-based.
Answer: C
NEW QUESTION 37
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
- B. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- C. It ensures route tags match the SD-WAN rule based on the rule order
- D. It tags each route and references the tag in the routing table.
Answer: C
NEW QUESTION 38
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links One link has random jitter and latency issues and is based on a wireless connection Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD_WAN rules?
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Use the performance SLA targets to detect latency and jitter instantly.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Place the troublesome link at the top of the interface preference list.
- E. Choose the suitable interface based on the interface cost and weight.
Answer: A,B
NEW QUESTION 39
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links
- B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
- C. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
- D. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance
Answer: A,B
NEW QUESTION 40
Which statement is correct about the SD-WAN and ADVPN?
- A. Spoke support dynamic VPN as a static interface.
- B. ADVPN interface can be a member of SD-WAN interface.
- C. Dynamic VPN is not supported as an SD-Wan interface.
- D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
Answer: C
NEW QUESTION 41
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?
- A. The dead member interface stays unavailable until an administrator manually brings the interface back.
- B. Check interval is the time to wait before a packet sent by a member interface considered as lost.
- C. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
- D. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
Answer: D
NEW QUESTION 42
......
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Fortinet NSE7_SDW-6.4 Pre-Exam Practice Tests | TorrentValid: https://www.torrentvalid.com/NSE7_SDW-6.4-valid-braindumps-torrent.html
NSE7_SDW-6.4 practice test questions, answers, explanations: https://drive.google.com/open?id=14yVWqKlmkFa6Hr_SB6B_Y-4LKyVBhGGC