Pass Your 300-510 Exam Easily - Real 300-510 Practice Dump Updated Jan 24, 2022
2022 Realistic Verified Free Cisco 300-510 Exam Questions
How to Prepare for Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
Preparation Guide for Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
Introduction
Cisco Systems located in San Jose, California in the heart of Silicon Valley is an American multinational technology corporation. Cisco designs produce and sell hardware, software, telecommunications equipment, and other high-tech services and products for networking. Cisco specializes in unique tech markets, such as the Internet of Things (IoT), domain security, and energy management, through its various acquired subsidiaries, such as OpenDNS, Webex, Jabber, and Jasper.
A world of opportunity is being created by Cisco technology. With Cisco’s Training and Certifications, one can power their career with a new learning portfolio that opens opportunities for developers as well as network engineers. A direct path to your technology career ambitions is provided by Cisco’s training and certification program. IT technologies are driving the transformation of Cisco’s training and qualification programs to prepare teachers, engineers, and developers of software for success in the most important positions in the industry.
Explore the power of the dynamic culture of the Cisco Learning Network to jump-start your certification and lifelong learning goals. Get useful tools for IT training for all Cisco certifications. Access research tools for IT certification, CCNA practice exams, IT wages, and finding IT work.
This exam guide is intended to help you determine if you can complete the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all to help you obtain a passing grade. To increase your chances of passing the test, different types of 300-510 SPRI practice exams and 300-510 SPRI dumps are the best option.
Topics of Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
These core topics of 310-510 SPRI practice test listed below are general recommendations for the material that is likely to be used for the examination. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the 310-510 SPRI dumps pdf and for clarity purposes.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) examination is listed below in detail for each section of 300-510 SPRI dumps:
- Implement Route Redistribution
- Troubleshooting Routing Protocols
- Scaling BGP in Service Provider Networks
- Implement BGP Security Options
- Implementing Interdomain IP Multicast
- Implementing Segment Routing
- Enable and Optimize PIM-SM
- Implement BGP Route Reflectors
- Implementing Route Redistribution
- Implement Tunnels for IPv6
- Implement and troubleshoot MPLS traffic engineering
- Implement advanced features to improve convergence in BGP networks
- Describing Segment Routing Traffic Engineering (SR-TE)
- Securing BGP in Service Provider Networks
- Implementing Cisco MPLS Traffic Engineering
- Implementing and Verifying MPLS
- Implement BGP security options
- Troubleshoot OSPF, ISIS, and BGP
- Implement enhanced Protocol-Independent Multicast - Sparse Mode (PIM-SM) features
- Implementing and Verifying Open Shortest Path First Multiarea Networks
- Implementing Distributed Rendezvous Point Solution in Multicast Network
- Implement and verifying the PIM-SM protocol
- Influence BGP Route Selection
- Implementing IP Multicast Concepts and Technologies
- Introducing Routing Protocol Tools, Route Maps, and Routing Policy Language
- Implement Rendezvous Point Distribution
- Implementing PIM-SM Enhancements
- Improving BGP Convergence and Implementing Advanced Operations
- Deploying IPv6 Tunneling Mechanisms
- Implement Cisco MPLS TE
- Describe and compare core multicast concepts
- Implement mechanisms for dynamic Rendezvous Point (RP) distribution
- Troubleshoot Routing Protocols
- Implement PIM-SM Enhancements
- Implement and verify MPLS
- Implement MPLS in the Service Provider Core
- Implementing and Verifying Intermediate System to Intermediate System Multilevel Networks
- Implement Multiarea IS-IS
- Implementing PIM-SM Protocol
- Implement and verify segment routing technology within an interior gateway protocol
- Describe how traffic engineering is used in segment routing networks
- Configure and Verify Interior Gateway Protocol (IGP) Segment Routing
- Implement OSPF Special Area Types (IPv4 and IPv6)
- Influencing Border Gateway Protocol Route Selection
- Implement Multicast Source Discovery Protocol (MSDP) in the interdomain environment
- Implement IPv6 tunneling mechanisms
NEW QUESTION 51
Refer to the exhibit.
A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 52
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The device must be reloaded for these ranges to be allocated and used.
- B. A nondefault segment routing global block range is being used on this device.
- C. This range conflicts with the segment routing local block range.
- D. The default segment routing global block range is being used on this device.
Answer: B
Explanation:
Reference:
segment-routing-book/seg-routing-global-block.html
NEW QUESTION 53
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- B. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- C. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
Answer: C
NEW QUESTION 54 
Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Set each specific route in the AGGRO policy to remove instead of suppress-route
- B. Set each specific route in the AGGRO policy to drop instead of suppress-route
- C. Configure the summary-only keyword on the aggregate command
- D. Filter the routes on the receiving router
Answer: C
NEW QUESTION 55
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/command/irg-cr-book/bgps1.
html#wp1552800140
NEW QUESTION 56
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The device must be reloaded for these ranges to be allocated and used.
- B. A nondefault segment routing global block range is being used on this device.
- C. This range conflicts with the segment routing local block range.
- D. The default segment routing global block range is being used on this device.
Answer: B
NEW QUESTION 57
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- D. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
Answer: A
NEW QUESTION 58
Refer to the exhibit.
Routers R1, R2. R3, and R4 have been configured to run OSPF. and router R5 is running EIGRP Traffic from R1 to R5 is expected to pass via R4. but OSPF routing has calculated the best path via R3. Which action corrects the problem?
- A. Change the metric-type value on R3 to 2.
- B. Reconfigure R1 in Area 0.
- C. Configure R1 with a static route to the R5 networks and set R5 as the next hop.
- D. Configure R3 to use metric-type 1 with a higher metric than R4.
Answer: A
NEW QUESTION 59
Refer to the exhibit.
CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core.
What
step can be done to troubleshoot the issue?
- A. Confirm that IS-IS is running with metric-style narrow.
- B. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.
- C. Configure BGP between CE and PE routers.
- D. Verify the MPLS LSPs.
Answer: A
NEW QUESTION 60
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only the default SSM range is permitted
- B. Only ASM is permitted
- C. Only the administratively scoped range is permitted
- D. Only GLOP is permitted
Answer: A
NEW QUESTION 61
What is the characteristic of enabling segment routing for IGPs?
- A. Segment routing must first be enabled globally and then under the routing process.
- B. Segment routing must be enabled only under the routing process.
- C. Segment routing must first be enabled under the routing process and then globally.
- D. Segment routing must be enabled only globally.
Answer: A
NEW QUESTION 62
What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?
- A. traffic controller
- B. SNMP server
- C. path computation engine
- D. tail-end router
Answer: C
NEW QUESTION 63
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R2, but not between R1 and R3.
- B. The BGP session comes up between R1 and R3, but not between R1 and R2.
- C. The BGP session does not come up between R1 and R2 and between R1 and R3.
- D. The BGP session comes up between R1 and R2 and between R1 and R3.
Answer: D
NEW QUESTION 64
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Software?
- A. multicast-routing
- B. ipv4 pim bidir-enable
- C. Ip pim bidlr-enable
- D. ip pim bidir ip
Answer: C
NEW QUESTION 65
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 66
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing can be enabled only globally
- B. Segment routing can be enabled only under the routing process
- C. Segment routing must first be enabled under then routing process and then globally
- D. Segment routing must first be enabled globally and then under the routing process
Answer: D
Explanation:
Reference:
book/sr-ospfv2-node-sid.html
NEW QUESTION 67
What is used by SR-TE to steer traffic through the network?
- A. explicit maps
- B. shortest path calculated by IGP
- C. dynamic rules
- D. path policy
Answer: D
NEW QUESTION 68
Which cost is the default when redistributing routes from BGP to OSPF?
- A. 0
- B. infinite
- C. automatic
- D. 1
Answer: D
Explanation:
Explanation/Reference: http://www.ciscopress.com/articles/article.asp?p=27573
NEW QUESTION 69
A network engineer is troubleshooting OSPF multiare A.
Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?
- A. DR support for topology management
- B. hierarchical CLI
- C. show ip ospf topology command
- D. routing process enabled by default on all interfaces
Answer: B
Explanation:
Reference:
guide/rc40xr12k_chapter4.html#con_1059437
NEW QUESTION 70
......
300-510 Real Exam Questions and Answers FREE: https://www.torrentvalid.com/300-510-valid-braindumps-torrent.html
300-510 Exam Questions | Real 300-510 Practice Dumps: https://drive.google.com/open?id=1Y4KmiGsZTgBG3RThLLrpN_JPj08tkV3J