Online 300-730 Test Brain Dump Question and Test Engine
Real Cisco 300-730 Exam Dumps with Correct 177 Questions and Answers
Why Cisco 300-730 exams are so difficult and why they're worth taking?
Cisco certifications are the most trending certification exams on the market. The Cisco certifications have been developed by industry experts and cover a wide range of job roles. Tens of thousands of professionals have already benefited from these exams and are enjoying successful careers in the IT industry. If you are planning to take Cisco exams then you should read this article till the end, because it will help you get a better understanding of what these exams are all about and how they can benefit your career as well. Cisco 300-730 exam dumps are regarded as some of the most difficult certification exams on the market. The official question is to concepts the team pool. Instant correct answers are the update VCE and PDF software. Even though Cisco 300-730 is a relatively recent exam, there is no doubt that this exam is going to be popular among IT specialists who want to prove themselves as true professionals in the industry. The reason why Cisco 300-730 is so difficult is that it covers a lot of material. In order to pass this exam, you need to be skilled in many areas and that is not easy at all. You need to be able to configure and troubleshoot systems that involve many technologies, including voice, data, video, wireless, security, and many others.
Cisco 300-730 certification exam is designed to test the knowledge and skills of IT professionals in implementing secure solutions with virtual private networks (VPNs). 300-730 exam is intended for those who work with Cisco technologies and want to validate their expertise in securing VPNs in enterprise networks. Implementing Secure Solutions with Virtual Private Networks certification exam covers a wide range of topics, including VPN technologies, secure communications, and troubleshooting techniques.
NEW QUESTION # 10
Which parameter must match on all routers in a DMVPN Phase 3 cloud?
- A. tunnel VRF
- B. EIGRP split-horizon setting
- C. GRE tunnel key
- D. NHRP network ID
Answer: C
Explanation:
NHRP network IDs are locally significant and can be different. It makes sense from a deployment and maintenance perspective to use unique network ID numbers (using the ip nhrp network-id command) across all routers in a DMVPN network, but it is not necessary that they be the same. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html
NEW QUESTION # 11
Refer to the exhibit.
A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?
- A. Enable auto sign-on for the user's IP address.
- B. Enable client services on the outside interface.
- C. Enable clientless protocol under the group policy.
- D. Enable DTLS under the group policy.
Answer: C
NEW QUESTION # 12
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.
Which command on the ASA is missing?
- A. same-security-traffic permit intra-interface
- B. dns-server value 10.1.1.2
- C. dns-server value 10.1.1.3
- D. same-security-traffic permit inter-interface
Answer: A
Explanation:
The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.
NEW QUESTION # 13
Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.)
- A. resolution request
- B. registration request
- C. registration reply
- D. resolution reply
- E. redirect
Answer: D,E
Explanation:
NHRP redirect is a function that allows the hub to inform the source spoke of a better path to reach the destination spoke, by sending an NHRP redirect message containing the IP address of the destination spoke. This triggers the source spoke to send an NHRP resolution request to the destination spoke, in order to establish a direct spoke-to-spoke tunnel1.
NHRP resolution reply is a function that allows the destination spoke to respond to the NHRP resolution request from the source spoke, by sending an NHRP resolution reply containing its own IP address and the IP address of the source spoke. This confirms the establishment of the direct spoke-to-spoke tunnel, and also allows the destination spoke to create a reciprocal tunnel to the source spoke2.
These two functions are specific to DMVPN Phase 3, because they enable spoke-to-spoke communication without requiring a dynamic routing protocol or going through the hub. In DMVPN Phase 1 and Phase 2, NHRP registration request, registration reply, and resolution request are also used, but they have different purposes and effects3.
NEW QUESTION # 14
Which two types of SSO functionality are available on the Cisco ASA without any external SSO servers? (Choose two.)
- A. NTLM
- B. OAuth 2.0
- C. SAML
- D. HTTP Basic
- E. Kerberos
Answer: A,D
NEW QUESTION # 15
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?
- A. no requirement for an overlay routing protocol
- B. enabled use of ESP or AH
- C. design for use over public or private WAN
- D. sequence numbers that enable scalable replay checking
Answer: A
Explanation:
one benefit of GET VPN is Simplified network design due to leveraging of native routing infrastructure (no overlay routing protocol needed) f mismatch is causing the problem with the IPsec VPN
NEW QUESTION # 16
A TCP based application that should be accessible over the VPN tunnel is not working. Pings to the appropriate IP address are failing.
Based on the output, what is a fix for this issue?
- A. Add a permit for TCP traffic going to 209.165.201.0/27.
- B. Add a permit for TCP traffic going to 10.1.1.0/24.
- C. Add a route on the remote peer for 209.165.201.0/27.
- D. Add a route on the local peer for 10.1.1.0/24.
Answer: C
NEW QUESTION # 17
An engineer would like Cisco AnyConnect users to be able to reach servers within the 10.10.0.0/16 subnet while all other traffic is sent out to the Internet. Which IPsec configuration accomplishes this task?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-3s/sec-flex-vpn-xe-3s-book/sec-cfg-flex-serv.html
NEW QUESTION # 18
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA.
What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Tunnel Network List Below under Group Policy
- B. Exclude Network List Below under Group Policy
- C. Tunnel All Networks under Group Policy
- D. Same-security-traffic permit inter-interface under Group Policy
Answer: A
Explanation:
To ensure that "3.3.3.3" is returned from a browser search on the IP address, you must configure the ASA with the Tunnel Network List Below option under the Group Policy. This allows all internal clients behind the ASA to be port address translated to the public outside interface with the IP address of 3.3.3.3. This will ensure that the correct IP address is returned from a browser search.
NEW QUESTION # 19
Which statement about GETVPN is true?
- A. The configuration that defines which traffic to encrypt originates from the key server.
- B. Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.
- C. TEK rekeys can be load-balanced between two key servers operating in COOP.
- D. The pseudotime that is used for replay checking is synchronized via NTP.
Answer: A
Explanation:
KS (key server) is 'caretaker' of the GM group. Group registrations and authentication of GMs is taken care of by KS server. Any GM who wants to join the group is required to be successfully authenticated in the group and sends encryption keys and policy to be used within the group.
===
https://ipwithease.com/introduction-to-getvpn/
NEW QUESTION # 20
An administrator is designing a VPN with a partner's non-Cisco VPN solution. The partner's VPN device will negotiate an IKEv2 tunnel that will only encrypt subnets 192.168.0.0/24 going to 10.0.0.0/24. Which technology must be used to meet these requirements?
- A. crypto map
- B. VTI
- C. GETVPN
- D. DMVPN
Answer: A
NEW QUESTION # 21
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
- A. anyconnect profile SSL_profile flash:simos-profile.xml
- B. webvpn import profile SSL_profile flash:simos-profile.xml
- C. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
- D. svc import profile SSL_profile flash:simos-profile.xml
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/200533- AnyConnect-Configure-Basic-SSLVPN-for-I.html
NEW QUESTION # 22
Which VPN solution uses TBAR?
- A. VTI
- B. GETVPN
- C. Cisco AnyConnect
- D. DMVPN
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get- vpn-xe-3s-book/sec-get-vpn.html
NEW QUESTION # 23
A user is experiencing delays on audio calls over a Cisco AnyConnect VPN. Which implementation step resolves this issue?
- A. Change to 3DES Encryption.
- B. Enable DTLS.
- C. Install the Cisco AnyConnect 2.3 client for the user to download.
- D. Shorten the encryption key lifetime.
Answer: B
NEW QUESTION # 24
Refer to the exhibit.
Which type of VPN is used?
- A. clientless SSL VPN
- B. Cisco AnyConnect SSL VPN
- C. Cisco Easy VPN
- D. GETVPN
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/vpn/asa-97-vpn-config/vpn-easyvpn.html
NEW QUESTION # 25
Which VPN does VPN load balancing on the ASA support?
- A. VTI
- B. IPsec site-to-site tunnels
- C. Cisco AnyConnect
- D. L2TP over IPsec
Answer: C
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 26
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. authentication aaa
- B. group-alias General enable
- C. authentication certificate
- D. group-policy General internal
- E. group-url https://172.16.31.10/General enable
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
NEW QUESTION # 27
An administrator is planning a VPN configuration that will encrypt traffic between multiple servers that will be passing unicast and multicast traffic. This configuration must be able to be implemented without the need to modify routing within the network. Which VPN technology must be used for this task?
- A. VTI
- B. GETVPN
- C. FlexVPN
- D. DMVPN
Answer: B
Explanation:
The VPN technology that must be used for this task is GETVPN (Group Encrypted Transport VPN). GETVPN is designed to encrypt both unicast and multicast traffic while preserving the original source and destination IP addresses, and it does not require any changes to the existing routing infrastructure. Additionally, GETVPN provides a scalable and efficient solution for encrypting traffic within a network, making it a good choice for this scenario.
NEW QUESTION # 28
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-run
- B. auto-start
- C. auto-upgrade
- D. auto-connect
Answer: B
NEW QUESTION # 29
A network engineer has set up a FlexVPN server to terminate multiple FlexVPN clients. The VPN tunnels are established without issue. However, when a Change of Authorization is issued by the RADIUS server, the FlexVPN server does not update the authorization of connected FlexVPN clients. Which action resolves this issue?
- A. Fix the RADIUS key mismatch between the RADIUS server and FlexVPN clients.
- B. Add the aaa server radius dynamic-author command on the FlexVPN server.
- C. Fix the RADIUS key mismatch between the RADIUS server and FlexVPN server.
- D. Add the aaa server radius dynamic-author command on the FlexVPN clients.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-16-10/sec-flex-vpn-xe-16-10-book/sec-ikev2-flex-coa.html
NEW QUESTION # 30
Refer to the exhibit.
An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 3: UN-NAT
- B. phase 5: NAT
- C. phase 4: ACCESS-LIST
- D. phase 9: rpf-check
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
The VPN tunnel between the FlexVPN spoke and FlexVPN hub 192.168.0.12 is failing. What should be done to correct this issue?
- A. Add the tunnel mode gre ip command to the tunnel configuration.
- B. Add the aaa authorization group psk list Flex_AAA Flex_Auth command to the IKEv2 profile configuration.
- C. Add the address 192.168.0.12 255.255.255.255 command to the keyring configuration.
- D. Add the match fvrf any command to the IKEv2 policy.
Answer: B
NEW QUESTION # 32
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. HSRP
- B. GLBP
- C. VRRP
- D. SSO
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/17826- ipsec-feat.html
NEW QUESTION # 33
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. group-alias General enable
- B. authentication certificate
- C. authentication aaa
- D. group-policy General internal
- E. group-url https://172.16.31.10/General enable
Answer: A,D
NEW QUESTION # 34
An engineer would like Cisco AnyConnect users to be able to reach servers within the 10.10.0.0/16 subnet while all other traffic is sent out to the Internet. Which IPsec configuration accomplishes this task?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
NEW QUESTION # 35
......
Valid 300-730 Test Answers & Cisco 300-730 Exam PDF: https://www.torrentvalid.com/300-730-valid-braindumps-torrent.html
Cisco 300-730 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1ngz5ZOWT84g4dfAK6fQaYz6qpry7uQVk