Latest [Jun 09, 2024] Realistic Verified CT-TAE Dumps
Pass ISTQB CT-TAE Exam Updated 82 Questions
ISTQB CT-TAE certification is ideal for professionals who are involved in test automation, such as test automation engineers, test automation architects, and test automation managers. Certified Tester Test Automation Engineer certification is also suitable for software developers, quality assurance professionals, and project managers who are interested in learning about test automation and its benefits. Certified Tester Test Automation Engineer certification is available to anyone who has completed the ISTQB Foundation Level certification, which is a prerequisite for the CT-TAE exam.
ISTQB CT-TAE (Certified Tester Test Automation Engineer) exam is designed for software testers who are interested in advancing their skills and knowledge in test automation. Certified Tester Test Automation Engineer certification is the highest level of certification offered by the International Software Testing Qualifications Board (ISTQB) and is recognized globally. CT-TAE exam covers various topics related to test automation such as test planning, design, implementation, execution, and maintenance.
NEW QUESTION # 20
You are the TAE for an Agile project which has six sprints for the current release. Sprint five is underway and the automated regression suite is due to start later today.
You have re-examined the results from the automated regression runs for the past four sprints. You notice that two test cases both reported a pass for sprints 1 and 4 but a fail for sprints 2 and 3. The failures have gone undetected and are therefore unexplained. Both test cases are closely coupled with other tests in the suite.
What course of action SHOULD you take?
- A. Remove the test cases from the regression suite and refer them to the test designer for manual testing for future sprints.
- B. Run the regression suite as planned and see If the tests fail again if they do, determine the cause of failure.
- C. Run the test cases manually now. If they still pass, keep them in the regression suite, if they fail perform root cause analysis.
- D. Quarantine the test cases, run the regression suite without them, and perform root cause analysis on the test cases in parallel.
Answer: D
NEW QUESTION # 21
You are working as a TAE for a company who have been using a web test execution tool for a number of years. The tool has been used successfully on ten web applications in the past.
The company are developing a new web application which has a friendly User Interface, but the developers have used an object throughout the application which the tool is unable to recognise. As a result, you have no way of capturing the object or verifying the contents using the automation tool.
What is the first thing you should do about this problem?
- A. Investigate whether the object can be recognised by other test execution tools in the market
- B. Ask the developers if they can change the object to something that can be recognised by the tool
- C. See if the application can be run on a desktop and if the object can be recognised on the desktop by the tool.
- D. Ask the developers to remove the object and replace it with some text fields
Answer: A
NEW QUESTION # 22
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been added to the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. The configuration management process does not properly control the synchronization between software archives
- B. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
- C. The automated regression test suite has a narrower scope of functionality
- D. The automated regression test suite is not run consistently for future releases.
Answer: A
Explanation:
The re-occurrence of a defect that has been previously resolved and validated can be attributed to issues in the configuration management process. If the configuration management process is not robust, it may fail to maintain proper synchronization between software archives. This can lead to situations where the defect re-emerges in future releases because the software components are not correctly integrated or updated with the defect fix. Effective configuration management is crucial for ensuring that all software artifacts are correctly versioned and that changes are properly tracked and integrated across all versions of the software. References = The ISTQB Test Automation Engineer syllabus outlines the importance of configuration management in relation to test automation and defect management. It emphasizes the need for proper control and synchronization of software archives to prevent the re-occurrence of defects123.
NEW QUESTION # 23
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
- B. It allows testers to find more defects on the SUT
- C. It allows developing steps of the test process without being closely tied to the SUT interface.
- D. It allows specify test cases without being closely tied to the tool to run them against the SUT
Answer: D
NEW QUESTION # 24
Which of the following is NOT a technical design consideration for a TAA?
- A. Availability of interfaces for the SUT to be testable
- B. The number of users for the SUT
- C. Standards and Legal requirements, e.g data privacy
- D. Data used by the SUT, e.g configuration, users
Answer: B
Explanation:
The technical design considerations for a Test Automation Architecture (TAA) are primarily focused on the technical aspects that will influence the design and development of the test automation solution. This includes the availability of interfaces for the SUT to be testable, which is crucial for automating tests, as well as adhering to standards and legal requirements like data privacy to ensure compliance and protect sensitive information. The data used by the SUT, such as configuration data and user data, is also a key consideration as it affects how tests are designed and executed. However, the number of users for the SUT is not a technical design consideration for a TAA; it is more related to performance testing and scalability rather than the technical design of the test automation itself.
References = The ISTQB Test Automation Engineer (CT-TAE) certification materials provide detailed insights into the design, development, and maintenance of test automation solutions, covering the necessary technical considerations for a TAA123.
NEW QUESTION # 25
You are planning the pilot for an in-house developed Test Automation solution (TAS).
Which two of the following would be important steps to take as part of the planning process?
a) Review your organisation's current projects and identify which one would be most suitable to pilot the TAS.
b) Ensure that the developers will provide the necessary commitment for the TAS deployment activities.
c) Run a series of training workshops for new users of the TAS before they are asked to use it.
d) Develop a project plan for the pilot and reserve the necessary budget and resources for its implementation.
e) Ask the developers to provide any missing functionality during the deployment activities.
- A. c and e
- B. a and b
- C. c and d
- D. b and d
Answer: D
NEW QUESTION # 26
Which of the following is an important success factor for any significant automation project?
- A. The SUT is self-documenting
- B. The TAA must be designed for testability.
- C. The SUT must be designed for testability
- D. The TAA is self-documenting
Answer: C
Explanation:
For any significant automation project, a critical success factor is that the System Under Test (SUT) must be designed for testability (Option C). Testability refers to the ease with which a system can be tested, which includes aspects like accessibility to test interfaces, observability of outputs, controllability of inputs, and the system's ability to be put into a known state for testing. A SUT designed with testability in mind facilitates the creation and execution of automated tests, enhancing the effectiveness, reliability, and coverage of the Test Automation Architecture (TAA). This design consideration directly impacts the efficiency of testing activities, reducing the time and effort required to achieve comprehensive test coverage and identify defects.
NEW QUESTION # 27
A regression test suite consist of 500 test cases which are all executed manually. The business case for a pilot project is based on the adoption of test automation using a commercial tool that will reduce the execution time by a factor of 90% for 100% of the tests in the regression test suite. The pilot project lasted one month ( as planned) and you are currently its results. At the end of the pilot project, 40% of the regression tests have been automated and their execution time has been reduce by 60%.
Which of the following statements is TRUE in this scenario?
- A. The duration of the pilot project was too short -it should last unit the success factors are achieved
- B. The target defined for the business case seems difficult to hit - it should be realistic
- C. The target defined for the business case is too accurate -it should not be measureable
- D. The project selected for the pilot is too critical -if should not be too critical or too trivial
Answer: B
NEW QUESTION # 28
You are working on a TAS for standalone application. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements include menus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Verify whether the GUI identification depends on the browser.
- B. Adopt an approach that uses the coordinates of the GUI elements instead
- C. Verify whether naming standards for variables and have been defined for the current automation solution
- D. Verify the testability support with the providers of the third party components
Answer: D
NEW QUESTION # 29
Your functional regression test automation suite ran successfully for the first two sprints and no failures were encountered during the runs. The automation suite records the status of each test case as either 'pass' or 'fail' and has excellent recovery capability built in.
For the third sprint, the TAS log reported several test cases with a status of 'fail'. You investigated each test case and found that most failures were due to a defect in one of the keyword scripts, rather than in the SUT. For those where the failure was in the SUT, defect reports were raised but several were returned by the developers asking for more information to enable them to reproduce the problem.
Which additional log items SHOULD you add to the TAS that would BEST improve failure analysis and defect reporting for future sprints?
a) Dynamic measurement information about the SUT.
b) A status of TAS error', in additional to pass' and 'fail', for each test case.
c) Use of a colour coding scheme so that 'pass' is in red and fail' is in green.
d) A counter to determine how many times each test case has been executed.
e) System configuration information including software/firmware and operating system versions.
f) A copy of the source code for all Keyword scripts executed.
- A. a and b
- B. a and c
- C. d and e
- D. b and e
Answer: C
NEW QUESTION # 30
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?
- A. Verify the behavior of the whole automated test suite by running all the automated tests
- B. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
- C. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.
- D. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify its behavior
Answer: C
NEW QUESTION # 31
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?
- A. Environment in which the tests have been executed
- B. System/Application under test and its version
- C. Summary of the test execution results
- D. Defect clusters identified during test execution
Answer: D
NEW QUESTION # 32
You are a TAE working for a software house which provides quarterly releases of its software to its customers.
There are many different versions of the SUT that need to be tested simultaneously by different tests teams.
Your TAS is complex and you need to ensure it remains consistent across the different SUT environments.
What is the BEST and MOST efficient way to ensure each of the test teams use the same version of the TAS to test the different versions of the SUT?
- A. Install the TAS is a central repository and have an automated installation and configuration of the TAS from this repository to each of the SUT environments.
- B. Develop a tool to track historical test results across the different SUT environments and look for trends.
- C. Due to the complexities involved and the high risks associated with these releases, it would be best to revert to manual testing.
- D. Produce comprehensive documentation of the TAS, installation and usage guidelines and provide training for each team member.
Answer: A
Explanation:
Observability in the context of a System Under Test (SUT) refers to the degree to which the system provides insights into its behavior, allowing users to understand the status of various actions performed. This enables users to verify that the system's actual behavior matches the expected behavior. Observability is crucial for diagnosing issues, understanding system performance, and ensuring that the system functions correctly.
References = The concept of observability is covered in the ISTQB Test Automation Engineer syllabus, which discusses the importance of designing a system that provides clear and understandable interfaces giving control and visibility on all test levels. This includes the ability of the SUT to provide interfaces that give insight into the system, which is essential for creating effective and maintainable automated tests1.
NEW QUESTION # 33
Which of the following is an important success factor for any significant automation project?
- A. The SUT is self-documenting
- B. The TAA must be designed for testability.
- C. The SUT must be designed for testability
- D. The TAA is self-documenting
Answer: C
NEW QUESTION # 34
You are using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Which of the following layers of the gTAA should you focus on for the TAS?
- A. The Test Definition layer
- B. The Test Execution layer
- C. The Test Adaption layer
- D. The test Generation layer
Answer: C
Explanation:
In the context of using a gTAA for creating a TAS, particularly for automating a suite of existing manual test cases for standalone desktop applications with interfaces from the CUI of the application, the focus should be on the Test Adaption layer. This layer is crucial as it deals with adapting the test cases to the specific interfaces of the System Under Test (SUT). It involves creating the necessary mappings and interactions with the CUI, ensuring that the automated tests can effectively communicate with the application as a user would through the CUI.
References = The importance of the Test Adaption layer in the gTAA is highlighted in resources that discuss the Generic Test Automation Architecture and its application in test automation projects12. These resources provide insights into how each layer of the gTAA serves a specific purpose in the development of a TAS, with the Test Adaption layer being key for interfacing with the SUT3.
NEW QUESTION # 35
Which of the following is NOT a technical design consideration for a TAA?
- A. Availability of interfaces for the SUT to be testable
- B. The number of users for the SUT
- C. Standards and Legal requirements, e.g data privacy
- D. Data used by the SUT, e.g configuration, users
Answer: B
NEW QUESTION # 36
You are implementing test automation for a project and you want to be able to generate test cases automatically using a series of test design tools which use a variety of test design techniques such as decision tables, pairwise testing and boundary value analysis.
You also want to generate test data automatically which can then be used by the tests.
Initially these tests will be run manually to verify their correctness and ultimately you want to include them in the test execution tool so that they can run unattended.
Which layer of the gTAA will be used to support the specification of the test cases and preparation of the test data?
- A. The execution layer
- B. The generation layer
- C. The adaptation layer
- D. The definition layer
Answer: D
NEW QUESTION # 37
......
The CT-TAE exam covers a wide range of topics related to test automation, including test automation design, development, execution, maintenance, and metrics. CT-TAE exam is designed to test the candidate's knowledge and skills in using various test automation tools and frameworks such as Selenium, Appium, and Robot Framework. CT-TAE exam also covers topics related to software development methodologies, testing techniques, and software quality assurance.
Get 2024 Updated Free ISTQB CT-TAE Exam Questions and Answer: https://www.torrentvalid.com/CT-TAE-valid-braindumps-torrent.html
CT-TAE Dumps PDF and Test Engine Exam Questions: https://drive.google.com/open?id=1G09VTjUbQgWaOtrjmlL-hBvCq3v5X0M8