Latest DES-1121 exam dumps with real EMC questions and answers [Q22-Q39]

Share

Latest DES-1121 exam dumps with real EMC questions and answers

DES-1121 Exam in First Attempt Guaranteed


The EMC DES-1121 certification exam is a valuable credential for individuals who want to demonstrate their skills and knowledge in implementing and managing PowerMax and VMAX family solutions. This certification can help IT professionals stand out in the job market and advance their careers. With the help of proper training and preparation, individuals can successfully pass this exam and become certified EMC specialists in PowerMax and VMAX family solutions.


The EMC DES-1121 (Specialist - Implementation Engineer, PowerMax and VMAX Family Solutions) certification exam is designed for professionals who are seeking to enhance their skills in implementing and managing data storage solutions using EMC's PowerMax and VMAX Family technologies. This certification exam is ideal for IT professionals who are responsible for designing, deploying, and managing enterprise-class storage solutions in a variety of organizations.

 

NEW QUESTION # 22
Which Open Replicator device type resides on the array running Open Replicator?

  • A. Control
  • B. Donor
  • C. Remote
  • D. Local

Answer: A


NEW QUESTION # 23
Which product(s) support(s) only 7+1 in RAID 5 configurations?

  • A. VMAX3
  • B. VMAX All Flash
  • C. VMAX All Flash and PowerMax 2000
  • D. VMAX All Flash and PowerMax 8000

Answer: B


NEW QUESTION # 24
What is the performance metric for the read-to-write ratio of workloads on a specific logical block address?

  • A. Prefetch
  • B. Data spanning
  • C. Workload clustering
  • D. Workload type

Answer: D


NEW QUESTION # 25
An RDF group on a VMAX3 array is being replicated in SRDF/A mode to a remote VMAX3 array To accommodate application growth a new R1 device needs to be added to the RDF group SRDF/A consistency of the existing devices in the RDF group should be maintained when the new device is added.
What is the correct sequence of steps for adding the new R1 device and making it available for application use?

Answer:

Explanation:


NEW QUESTION # 26
Which service has to be manually started first when Unisphere services are down?

  • A. SYMEVENT
  • B. SMASDB
  • C. SMAS
  • D. SMI-S

Answer: C

Explanation:
https://www.dell.com/support/kbdoc/en-ca/000167303/powermax-vmax-all-flash-and-unisphere-for-powermax-smas-service-does-not-start-for-new-installation-of-unisphere-for-powermax-on-rhel-platform


NEW QUESTION # 27
In Unisphere which role has limited privileges that can only view the information about a storage array and is unable to make any configuration changes?

  • A. Auditor
  • B. StorageAdmin
  • C. None
  • D. Monitor

Answer: D


NEW QUESTION # 28
On a PowerMax or VMAX Family array, what is the default Dynamic I/O distribution mode setting when a Storage Group is associated with Host I/O Limits?

  • A. Never
  • B. Always
  • C. On Failure
  • D. Balanced

Answer: A


NEW QUESTION # 29
On a PowerMax what is the correct sequence of steps to deduplicate data?

Answer:

Explanation:


NEW QUESTION # 30
An administrator is managing two PowerMax arrays that are located in two different data centers. The data centers are 550 km apart and are connected by a high bandwidth network link. The administrator wants to replicate data between the two arrays and achieve the lowest RPO When using SRDF. which mode meets this requirement?

  • A. Synchronous
  • B. Metro
  • C. Adaptive Copy
  • D. Asynchronous

Answer: B


NEW QUESTION # 31
A non-production environment has been created with a VMFS Datastore named TestDS and a virtual machine named TestVM. SRDF/S has been configured between two PowerMax arrays One ESXi server is connected to the R1 device and another is connected to the R2 device. The VMFS Datastore resides on the R1 device. The systems administrator wants to test the environment for disaster recovery readiness To simulate a disaster on the R1 side a graceful failover will be done. What is the correct sequence of steps on the R1 side of the test environment to perform a graceful failover?

Answer:

Explanation:


NEW QUESTION # 32
You have just presented storage to an ESXi server and want to rescan the storage adapter to ensure the server can see the new volume Based on recommended best practices, what is the preferred method to perform this task?

  • A. Run the command from a non-cluster host using the ESX CLI
  • B. Use the vSphere VSI plugin to rescan the entire cluster
  • C. Run the command from the ESXi server with the ESX CLI enabled
  • D. Use the vSphere Client to perform the rescan of the host

Answer: B


NEW QUESTION # 33
Which compression algorithm is used on a PowerMax?

  • A. LZS
  • B. FastLZ
  • C. Deflate
  • D. LZW

Answer: C


NEW QUESTION # 34
How does Solutions Enabler use Gatekeepers to pass commands to the PowerMax array?

  • A. Obtains the Gatekeeper and unlocks the device Processes the system commands and locks the device.
  • B. Automatically creates the Gatekeeper and unlocks the device. Processes the system commands; locks and deletes the Gatekeeper
  • C. Automatically creates the Gatekeeper and locks the device Processes the system commands; unlocks and deletes the Gatekeeper.
  • D. Obtains the Gatekeeper and locks the device. Processes the system commands and unlocks the device

Answer: A


NEW QUESTION # 35
An SRDF/Metro pair was created with vWitness After a network outage, the administrator discovers that the SRDF pair is in an ActiveBias state What is the correct sequence of events to bring the SRDF pair into an ActiveActive state?

Answer:

Explanation:


NEW QUESTION # 36
What are the main options used to complete a configuration change using the synconfigure command?

  • A. preview, prepare, reserve
  • B. preview query, reserve
  • C. preview query, commit
  • D. preview, prepare, commit

Answer: D


NEW QUESTION # 37
What does a service level define*?

  • A. Expected average throughput for a disk group
  • B. Expected average response time target for a Storage Group
  • C. Expected average throughput for a Storage Group
  • D. Expected average response time target for a disk group

Answer: B


NEW QUESTION # 38
Which PowerMax software packages include NorvDisruplive Migration?

  • A. FX and Pro
  • B. F and FX
  • C. Essentials and Pro
  • D. F and Essentials

Answer: C


NEW QUESTION # 39
......

Exam Sure Pass EMC Certification with DES-1121 exam questions: https://www.torrentvalid.com/DES-1121-valid-braindumps-torrent.html

Download Real DES-1121 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=11fPSqe1NgHr-hsABSJemjlp9b-xmZBxA