[Jan-2022] 201 Dumps are Available for Instant Access using TorrentValid
201 Dumps 2022 - New F5 201 Exam Questions
F5 201 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 136
A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client's IP address, but on the virtual servers their packets arrive on. What could best accomplish this goal?
- A. The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.
- B. The decision to perform source address translation is always based on a client's address (or network). Thus, this goal cannot be achieved.
- C. Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.
- D. A SNAT for all addresses could be defined, and then disable the SNAT processing for select VLANs.
Answer: C
NEW QUESTION 137
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 138
Refer to the exhibit.
The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.
What should the BIG-IP Administrator check next?
- A. Results from the platform diagnostics test
- B. Large files on /usr file system
- C. Large files on the / file system
- D. Results from the EUD test
Answer: C
NEW QUESTION 139
A virtual server is defined using a sourceEladdress based persistence profile. The
last five connections were A, B, C, A, C . Given the conditions shown in the graphic,
if a client with IP address 205.12.45.52 opens a connection to the virtual server,
which member will be used for the connection.
- A. 10.10.20.4:80
- B. 10.10.20.3:80
- C. 10.10.20.5:80
- D. 10.10.20.1:80
- E. 10.10.20.2:80
Answer: E
NEW QUESTION 140
Which two statements are true concerning the default communication between a redundant pair of BIGElIP systems. (Choose two.)
- A. Connection mirroring data is shared through the serial faiEl lover cable unless network failElover is enabled.
- B. Connection mirroring data is shared via a TCP connection using port 1028.
- C. Synchronization occurs via a TCP connection using ports 683 and 684.
- D. Persistence mirroring data is shared via a TCP connection using port 1028.
Answer: B,D
NEW QUESTION 141
Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.
- A. While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.
- B. Most templates, such as https, should have the receive rule customized to make the monitor more robust.
- C. Most templates, such as http and tcp, are as effective as customized monitors.
- D. Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.
Answer: B
NEW QUESTION 142
Refer to the exhibit.
A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.
Which actional configuration is regard to resolve this issue?
- A. Configure SSL Profile (Client)
- B. Configure Service Profile HTTP
- C. Configure Protocol Profile (Server)
- D. Configure SSL Profile (Server)
Answer: A
NEW QUESTION 143
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual
server processing takes place. Also assume that the NAT definition specifies a
NAT address and an origin address while all other settings are left at their defaults.
If the origin server were to initiate traffic via the BIGElIP, what changes, if any,
would take place when the BIGElIP processes such packets.
- A. The BIGElIP would drop the re quest since the traffic didn arrive destined to the NAT address.The BIGElIP would drop the request since the traffic didn. arrive destined to the NAT address.
- B. The source address would not change, but the destination address would be changed to a seEllIfP of the BIGElIP.
- C. The source address would not change, but the destination address would be changed to the NAT address.
- D. The source address would be changed to the NAT address and destination address would be left unchanged.
Answer: D
NEW QUESTION 144
A BIG-IP Administrator needs to install a HotFix on a standalone BIG-IP device, which has HD1.1 as the Active Boot Location. The BIG-IP Administrator has already re-activated the license and created an UCS archive of the configuration. In which sequence should the BIG-IP Administrator perform the remaining steps?
- A. Install HotFix in HO 1.2, Install base Image in HD 1.2, Activate HD1.2
- B. Install base Image in HD1.2, Install HotFix in HD1.2, Activate HD 1.2
- C. Activate HD 1.2, Install base image in HD 1.2. Install HotFix in HD 1.2
- D. Install HotFix in HD 1.1, Reboot the BIG-IP device. Install UCS Archive
Answer: B
NEW QUESTION 145
Refer to the exhibit.
How many nodes are represented on the network map shown?
- A. Two
- B. Three
- C. One
- D. Four
Answer: B
NEW QUESTION 146
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue?
- A. Set Destination Addresses/Mask to 0.0.0.0/0
- B. Set Source Address to 10.1.1.2
- C. Set HTTP Profile to None
- D. Set Protocol to UDP
Answer: C
NEW QUESTION 147
A BIG-IP Administrator opens a case with F5 Support. The support engineer requests the BIG-IP appliance chassis serial number.
Which TMSH command will provide this information?
- A. . list /sys software
- B. list/sys diags
- C. show /sys hardware
- D. show /sys version
Answer: C
NEW QUESTION 148
A site has assigned the ICMP
monitor to all nodes and a custom monitor, based on the HTTP template,
to a pool of web
servers. The HTTPElbased monitor
is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member. 5 nodes. All other settings are default. What is the status of the pool members.
- A. The pool members whose nodes are failing the ICMPElbased monitor will be marked unavailable.
- B. All pool members are up since the HTTPElbased monitor is successful.
- C. All pool members are down since the ICMPElbased monitor is failing in some cases.
- D. The pool members whose nodes are failing the ICMPElbased monitor will be marked disabled.
Answer: A
NEW QUESTION 149
A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIG-IP, what will occur to the IP addresses?
- A. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address. Traffic arriving destined to other destinations will have the source translated to a self-IP address only.
- B. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address.
- C. Traffic initiated by selected clients, based on their IP address, will have the source address translated to a self-IP address but the destination will only be translated if the traffic is destined to the virtual server.
- D. Traffic initiated by the pool members will have the source address translated to a self-IP address but the destination address will not be changed.
Answer: B
NEW QUESTION 150
A standard virtual server has been associated with a pool with multiple members.
Assuming all other settings are left at their defaults, which statement is always true
concerning traffic processed by the virtual server.
- A. The TCP ports used in the clienEl tside connection are the same as the TCP ports serverElside connection.
- B. The client IP address is unchanged between the cEl ls iedne t connection and the serverElside connection.
- C. The server IP address is unchanged between the cEl lis end te connection and the serverElside connection.
- D. The IP addresses used in the clientElside connection are the same as the IP addresses used in the serverElside connection.
Answer: B
NEW QUESTION 151
......
Understanding of functional and technical aspects of Troubleshooting basic hardware issues
The following will be discussed in this section:
- Given a log file, determine the nature of a hardware issue
- How to reboot an F5 platform into the EUD
- Understand the relationship between interfaces, trunks, VLANs and their status/statistics
- How to identify which tasks the buttons on the LCD perform
- Indicate which logs would contain debugging information
- Given a possible issue, determine which log file entries to review
- How to correlate the LCD message to message in the corresponding log file
- How to locate the LCD on an F5 Platform
- How to download output from the unit an EUD was run on
- How to interpret the output from an EUD and determine if the test passed or failed
How to Prepare For F5-201: TMOS Administration Exam
Preparation Guide for F5-201: TMOS Administration Exam
Introduction
An F5 Certified BIG-IP Administrator can manage application delivery networks (ADNs) and perform routine management and troubleshooting of F5 Traffic Management Operating System (TMOS) devices. Two exams are required to achieve the F5-CA certification:
- Exam 201 - TMOS Administration
- Exam 101 - Application Delivery Fundamentals
A F5 Certified BIG-IP Administrator manages preexisting BIG-IP installations and preliminary fault isolations. They must have the ability to make necessary configuration changes and modify BIG-IP objects. They are also responsible for application delivery networks (ADNs) and for conducting routine management and troubleshooting of F5 Traffic Management Operating System (TMOS) devices.
These Certified Experts use TMSH as well as a configuration utility to monitor BIG-IP resources such as virtual servers, pools, pool members, nodes, profiles and monitors. They also create, restore from and manage BIG-IP archives. Certified BIG-IP Administrators are further responsible for checking a resource’s status, availability and statistics, in order to understand how BIG-IP systems are currently processing traffic.
Administrators define the role of BIG-IP systems as a proxy device within an ADN. They set up, license and provision BIG-IP systems. A Certified BIG-IP Administrator uses profiles to control the way BIG-IP systems process traffic through virtual servers. They are also responsible for troubleshooting and determining problems using various diagnostic tools.
Passing this exam shows independence in performing day-to-day operations and basic troubleshooting of TMOS-based devices in various application environments after it has been installed, configured, and implemented. Individuals may choose to complete their certification journey here or move on to pursue the Technical Professional, Technical Specialist, Cloud, or Security Solutions certification tracks.
F5 201 Exam Practice Test Questions: https://www.torrentvalid.com/201-valid-braindumps-torrent.html
Free 201 Braindumps Download Updated: https://drive.google.com/open?id=1cE4OSpFHE8xwEf78aljlhg8xAUI-bHnp