HPE6-A73 Practice Test Questions Updated 124 Questions
HP HPE6-A73 Dumps - Secret To Pass in First Attempt
NEW QUESTION # 64
Which concept is implemented using Aruba's dynamic segmentation?
- A. Device fingerprinting
- B. Zero Touch Provisioning
- C. Root of trust
- D. Colorless port
Answer: A
Explanation:
Explanation
https://blogs.arubanetworks.com/solutions/whats-hiding-on-your-network/
NEW QUESTION # 65
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- B. Define the 239.0.0.1 stream on the rendezvous point (RP)
- C. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- D. Change the destination multicast address to 239.1.1.1
Answer: D
Explanation:
MAC/IP overlap. 239.0.0.1 would be the same MAC for 224.0.0.1. 224.0.0.0/24 is always flooded over every port.
NEW QUESTION # 66
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- B. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing.
- C. Each VSX peers runs PIM and builds its own group database Both VSX peers can forward multicast streams to receivers in a VLAN achieving load sharing.
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN.
Answer: D
NEW QUESTION # 67
Which concept is implemented using Aruba's dynamic segmentation?
- A. Device fingerprinting
- B. Zero Touch Provisioning
- C. Root of trust
- D. Colorless port
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 68
A network administrator is tasked to set up BGP in the company's network. The administrator is defining an eBGP peering between an AOS-CX switch and a directly-connected service provider. The administrator has configured the following on the AOS-CX switch:
However, when using the "show bgp all summary" command, the state does not display "Established" for the eBGP peer. What must the administrator configure to fix this issue?
- A. router bgp 64500 address-family ipv4 unicast neighbor 192.168.1.1 activate
- B. router bgp 64500 neighbor 192.168.1.1 ebgp-multihop
- C. router bgp 64500 neighbor 192.168.1.1 update-source loopback0
- D. router bgp 64500 enable
Answer: A
NEW QUESTION # 69
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?
- A. AOS-CX 6300
- B. AOS-CX 8400
- C. AOS-CX 8325
- D. AOS-CX 6400
Answer: C
NEW QUESTION # 70
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
- B. Implement local user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- D. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
Answer: C
NEW QUESTION # 71
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Set the ports to client-mode
- B. Enable change of authorization (CoA)
- C. Define the server group cppm
- D. Create and assign a local user role to the ports
Answer: B
NEW QUESTION # 72
A network administrator is installing NetEdit. In order for NetEdit to manage the AOS-CX switches in the network, what must be defined on the AOS-CX switches? (Choose two.)
- A. Enabling the RESTful API for read and write access
- B. Enabling telnet
- C. Defining the https user-group
- D. Enabling SFTP
- E. Defining an admin user password
Answer: A,E
NEW QUESTION # 73
When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?
- A. ">"
- B. Tab
- C. <ESC>
- D. Space
Answer: B
NEW QUESTION # 74
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. MAC authentication has passed, but 802.1X authentication is in progress
- B. The RADIUS request timed out to the AAA server
- C. No downloadable user role exists
- D. The port should be configured for 802.1X
Answer: D
NEW QUESTION # 75
Refer to the exhibit.
The ACL configuration defined on Core-1 is as follows:
if telnet was being used which device connection would he permitted and functional in both directions? (Select two }
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Client 3 to Client 2
- D. Server 2 to Client 2
- E. Server 1to Client 1
Answer: B,E
NEW QUESTION # 76
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. install AOS-CX 6300 or 6400 switches with always-on POE.
- B. Implement VSF on the AOS-CX access switches
- C. Implement VSX on the AOS-CX access switches
- D. Install the in-service software upgrade (ISSU) feature with clustering enabled
Answer: A
NEW QUESTION # 77
An administrator has an AOS-CX switch configured with:
router ospf 1
area 0
area 1 stub no-summary
It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1.
The current routes in each area are:
Area 0: 5 routes (LSA Type 1 and 2)
Area 1: 10 routes (LSA Type 1 and 2)
External routes: 2 (LSA Type 5)
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 78
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. The administrator does not have the appropriate credentials to interact with NAE
- B. The number of scripts or agents has exceeded the hardware's capabilities
- C. The RESTful API has not been enabled on the AOS-CX switch
- D. A connectivity issue exists between NAE and the AOS-CX switch
Answer: D
Explanation:
Explanation
NEW QUESTION # 79
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG interfaces are in layer-3 mode
- B. The VSX LAG hash does not match the remote peer
- C. LACP was enabled in active mode on the VSX LAG
- D. Local optimization was not enabled on the VSX LAG
Answer: B
NEW QUESTION # 80
An administrator of a company has concerns about upgrading the access layer switches. The users rely heavily on wireless and VoIP telephony. Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Install AOS-CX 6300 or 6400 switches with always-on POE
- B. Implement VSX on the AOS-CX access switches
- C. Install the in-service software upgrade (ISSU) feature with clustering enabled
- D. Implement VSF on the AOS-CX access switches
Answer: D
NEW QUESTION # 81
Which protocols are used by NetEdit to interact with third-party devices9 {Select two )
- A. CDP
- B. SNMP
- C. Restful API
- D. telnet
- E. SSH
Answer: B,E
NEW QUESTION # 82
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. MAC authentication has passed, but 802.1X authentication is in progress
- B. The RADIUS request timed out to the AAA server
- C. No downloadable user role exists
- D. The port should be configured for 802.1X
Answer: D
NEW QUESTION # 83
......
HP HPE6-A73 exam is an excellent certification exam for IT professionals who want to gain expertise in Aruba switching solutions. By passing HPE6-A73 exam, candidates can demonstrate their skills and knowledge in this area and gain recognition as an expert in the field. With the help of study materials and practice exams, candidates can prepare for HPE6-A73 exam and increase their chances of passing on the first attempt.
HP HPE6-A73 (Aruba Certified Switching Professional) Certification Exam is an industry-recognized certification that validates the knowledge and skills required to design, deploy, and manage ArubaOS-Switching solutions. HPE6-A73 exam is designed for network engineers, network administrators, and consultants who are responsible for deploying and managing Aruba switching solutions in enterprise environments.
HP HPE6-A73 exam is a comprehensive certification exam that covers a broad range of topics. Some of the topics you can expect to be tested on include Aruba switching fundamentals, VLANs, OSPF, Spanning Tree Protocol, Link Aggregation Control Protocol, Access Control Lists (ACLs), Quality of Service (QoS), Voice VLANs, Virtual Switching Framework, and more. Individuals who pass the HPE6-A73 exam are expected to have a deep understanding of switching technologies, their applications, and how they can be deployed in an organization's network infrastructure.
HP HPE6-A73 Exam Dumps [2024] Practice Valid Exam Dumps Question: https://www.torrentvalid.com/HPE6-A73-valid-braindumps-torrent.html
HPE6-A73 Dumps - Grab Out For [NEW-2024] HP Exam: https://drive.google.com/open?id=1mlf2uHRML3kg590kti01J5oXRFbQyrbJ