Free Mar-2025 UPDATED Fortinet FCP_FWF_AD-7.4 Certification Exam Dumps is Online
Fortinet Exam 2025 FCP_FWF_AD-7.4 Dumps Updated Questions
NEW QUESTION # 24
Employees at the remote office reported speed issues with the wireless network. Dual-band FortiAP devices have been correctly deployed throughout the office to ensure coverage and optimal performance. However, employees have noticed that the wireless stations consistently connect to the 2.4 GHz network but not the 5 GHz network.
What must IT administrators perform to troubleshoot the issue?
Response:
- A. Disable the 2.4 GHz radio to force the wireless stations to connect.
- B. Verify that the allocated frequency channel on FortiAP is not exhausted.
- C. Review if FortiAP resources are not experiencing high CPU or memory usage.
- D. Confirm whether internet speed limits are preventing access to high speed by wireless stations.
Answer: B
NEW QUESTION # 25
When troubleshooting common connectivity issues, which of the following steps would not typically be taken?
Response:
- A. Upgrade the RAM on client devices
- B. Check the DHCP server's operation
- C. Ensure correct VLAN assignment
- D. Review AP-to-controller connection status
Answer: A
NEW QUESTION # 26
For wireless networks configuration, which tools can be used?
Response:
- A. FortiPlanner
- B. FortiAP Cloud
- C. FortiPresence
- D. FortiGate integrated wireless controller
Answer: B,D
NEW QUESTION # 27
When developing the high-level scope phase in wireless design projects, which statement best describes the scope?
Response:
- A. It determines the top-tier groups that will be responsible for designing the wireless network.
- B. It covers the main topics to analysis existing wireless networks, and issues reports about general performance.
- C. It simplifies wireless design projects only for high-end devices that might require wireless connectivity.
- D. It uses the why, when, what and how questions to determine the goal of the project at a high level.
Answer: D
NEW QUESTION # 28
Which statement is correct about security profiles on FortiAP devices?
Response:
- A. Only bridge mode SSIDs can apply the security profiles
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- C. Disable DTLS on FortiAP
- D. FortiGate performs inspection the wireless traffic
Answer: A
NEW QUESTION # 29
What could be a potential solution in a high-density environment where clients face slow speeds and frequent disconnects?
Response:
- A. Reducing the AP transmit power
- B. Decreasing the DHCP lease time
- C. Enabling more security protocols
- D. Increasing the number of SSIDs
Answer: A
NEW QUESTION # 30
How can poor roaming capabilities between APs affect wireless clients in an office environment?
Response:
- A. Improved connection stability
- B. Increased throughput
- C. Enhanced wireless signal strength
- D. Frequent disconnections
Answer: D
NEW QUESTION # 31
What would be a primary concern if rogue APs are not monitored and suppressed in a network?
Response:
- A. Unauthorized access and potential data breaches.
- B. Inability to detect other rogue APs in the future.
- C. Reduced number of available IP addresses.
- D. Decreased Wi-Fi signal strength.
Answer: A
NEW QUESTION # 32
When preauthorizing an AP in the GUI, which minimum configuration parameter is required to add an AP?
Response:
- A. The FortiAP Profile and AP name
- B. The AP serial number and FortiAP Profile
- C. The AP serial number, FortiAP Profile, and AP login password
- D. The AP serial number
Answer: B
NEW QUESTION # 33
Why is capturing and analyzing AP-to-controller traffic essential?
Response:
- A. Troubleshooting potential connectivity or performance issues
- B. Determining client browsing history
- C. Monitoring the number of connected client devices
- D. Identifying any RF interference
Answer: A
NEW QUESTION # 34
What is a common method used to scan for rogue APs?
Response:
- A. Checking the uplink speed of all devices.
- B. Evaluating the DHCP server logs.
- C. Analyzing Ethernet traffic for suspicious patterns.
- D. Monitoring wireless channels and spectrum.
Answer: D
NEW QUESTION # 35
A company requires a secure wireless network to span several adjacent buildings. Employees need seamless roaming access across buildings, floors, and, potentially, outdoor areas. FortiAP devices will be used.
Which deployment is the most scalable, manageable, and cost-effective in this scenario?
Response:
- A. Configure FortiGuard-capable FortiAP devices to broadcast the corporate SSID without being managed by FortiGate in the main building.
- B. Install FortiWiFi with a cellular modem in the buildings and areas where no wireless signal reaches from the main building.
- C. Deploy a WAN connection on each building to allow FortiAP devices to communicate with FortiGate in the main building.
- D. Implement a wireless mesh design to allow FortiAP devices to use neighboring FortiAP devices to connect with FortiGate in the main building.
Answer: D
NEW QUESTION # 36
Which configuration is necessary to allow guest users access to a wireless network using the FortiGate guest management feature?
Response:
- A. Enable SSID hiding
- B. Configure VLANs on SSIDs
- C. Set up advanced bridge mode options
- D. Provision guest accounts
Answer: D
NEW QUESTION # 37
What is the primary purpose of configuring FortiAP profiles on a FortiGate wireless controller?
Response:
- A. To deploy advanced wireless settings to FortiAP devices
- B. To monitor real-time traffic on FortiAP devices
- C. To configure VLANs on SSIDs
- D. To manage guest accounts on the network
Answer: A
NEW QUESTION # 38
When securing a wireless environment, which measures can help prevent unauthorized access?
Response:
- A. Enabling a guest network
- B. Using strong encryption like WPA3
- C. MAC address filtering
- D. Regularly changing the network name (SSID)
Answer: B,C
NEW QUESTION # 39
Which device can act as a wireless controller?
Response:
- A. FortiGate
- B. FortiPlanner
- C. FortiPresence
- D. FortiAP Cloud
Answer: A
NEW QUESTION # 40
In a scenario where multiple SSIDs are broadcasting on a FortiAP device, how would you ensure that a specific SSID is associated with a particular network segment?
Response:
- A. Using advanced bridge mode options.
- B. Using the FortiGate guest management feature.
- C. Through FortiAP and client load balancing.
- D. By configuring VLANs on SSIDs.
Answer: D
NEW QUESTION # 41
What is the primary function of FortiPlanner?
Response:
- A. FortiGate device configuration
- B. Wireless network threat analysis
- C. Predictive modeling for wireless network planning
- D. Management of FortiAP devices
Answer: C
NEW QUESTION # 42
Which two reasons are common causes of poor performance for wireless clients?
(Choose two.)
Response:
- A. APs with channels set in the DFS frequency range.
- B. Too many clients associated with an AP's radio interface.
- C. Neighboring APs and clients on adjacent channels.
- D. Neighboring APs and clients on the same channel.
Answer: B,D
NEW QUESTION # 43
Which of the following tools are associated with predictive modeling or analytics?
Response:
- A. FortiPlanner
- B. FortiGate
- C. FortiPresence
- D. FortiAP Cloud
Answer: A,C
NEW QUESTION # 44
Which feature should be used to optimize client distribution across multiple access points in a high-density environment?
Response:
- A. SSID hiding
- B. Advanced bridge mode options
- C. VLAN configurations on SSIDs
- D. FortiAP and client load balancing
Answer: D
NEW QUESTION # 45
Which measure is the best indication of a wireless client's connection quality?
Response:
- A. AP association count
- B. Client signal strength
- C. Channel utilization
- D. Client link rates
Answer: D
NEW QUESTION # 46
......
Fortinet Certified FCP_FWF_AD-7.4 Dumps Questions Valid FCP_FWF_AD-7.4 Materials: https://www.torrentvalid.com/FCP_FWF_AD-7.4-valid-braindumps-torrent.html
Get The Most Updated FCP_FWF_AD-7.4 Dumps To Fortinet Network Security Expert Certification: https://drive.google.com/open?id=1gTZqJWV-ZD0FxfJNw2ciJFGhalbOEoV_