Free Jan-2023 HPE0-V14 Certification Sample Questions certification Exam
Certification Topics of HPE0-V14 Exam PDF Recently Updated Questions
NEW QUESTION 177
A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?
- A. HPE MSA 1040
- B. HPE MSA 2052
- C. HPE Nimble HF20C
- D. HPE Nimble AF20
Answer: D
Explanation:
Reference: https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00050816en_us-5.pdf
NEW QUESTION 178
A customer needs a storage solution to host a new virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
What features would lead you to propose an HPE Nimble array over an HPE 3PAR array? (Select two.)
- A. supports Object S3 Storage
- B. lower operating costs
- C. future proof design
- D. 10GD Base-T connectivity
- E. global replication
Answer: B,D
NEW QUESTION 179
Match the storage technology to the storage type.
Answer:
Explanation:
Explanation
BLOCK = iSCSi
File = CIFS
BLOCK = SAN
File = NFS
NEW QUESTION 180
When is it appropriate for a customer to implement HPE OneView Standard?
- A. To enable the Advanced iLO license
- B. To monitor their services
- C. To manage multiple servers
- D. To update firmware
Answer: B
NEW QUESTION 181
What is used to identify a storage HBA port in a Fibre Channel SAN fabric?
- A. MAC Address
- B. ION
- C. WWN
- D. SCSI ID
Answer: C
Explanation:
Explanation:
NEW QUESTION 182
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
Answer:
Explanation:
NEW QUESTION 183
ou are designing a system for a customer that runs an OLTP application. The customer has SAN based storage.
They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs?
- A. scalable persistent memory
- B. intelligent provisioning
- C. intelligent system tuning
- D. CNSA suite
Answer: C
NEW QUESTION 184
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
Answer:
Explanation:
Explanation
NEW QUESTION 185
Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.
Answer:
Explanation:
NEW QUESTION 186
Match each characteristic to the correct storage type.
Answer:
Explanation:
Explanation
Reference:
https://www.excitingip.com/1358/jbod-just-a-bunch-of-disks/
https://www.enterprisestorageforum.com/storage-networking/nas-vs.-san-differences-and-use-cases.html
NEW QUESTION 187
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?
- A. HPE SUM
- B. HPE SUT
- C. UEFI System Configuration
- D. iLO Advanced Edition
Answer: D
Explanation:
Explanation
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026111en_us#N11E72 iLO AlertMail enables user to configure iLO to send alert conditions detected independently of the host operating system to one or more email addresses. iLO AlertMail messages include major host system events that appear in the IML. For example, if a fan failure occurs, an event is recorded in the IML and an email message with the details is sent to the configured email addresses.
Reference: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na- a00026111en_us
NEW QUESTION 188
A customer requires a storage platform for their department dat
a. They have a limited budget and will be sharing files among their Microsoft Windows environment.
Which HPE storage platform meets the customer's needs?
- A. 3PAR StoreServ
- B. StoreEasy
- C. StoreOnce
- D. Nimble
Answer: B
NEW QUESTION 189
A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?
- A. RDMA
- B. RoCE
- C. FCoE
- D. NPAR
Answer: D
Explanation:
Reference:
https://h20195.www2.hpe.com/V2/getpdf.aspx/c04312719.pdf?ver=12
NEW QUESTION 190
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?
- A. HPE SUM
- B. HPE SUT
- C. UEFI System Configuration
- D. iLO Advanced Edition
Answer: D
Explanation:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na- a00026111en_us
NEW QUESTION 191
Refer to the exhibit.
You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack.
The administrator noticed the fan modules have red handles.
What should the administrator do to resolve the issue?
- A. Replace the fan modules with power-to-port fan modules.
- B. Add additional fan modules to the switch.
- C. Replace the fan modules with port-to-power fan modules.
- D. Change the fan direction with the fan preferred direction command.
Answer: D
NEW QUESTION 192
A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?
- A. HPE Nimble AF20
- B. HPE MSA 1040
- C. HPE MSA 2052
- D. HPE Nimble HF20C
Answer: D
NEW QUESTION 193
Match each HPE solution to its optimal use case.
Answer:
Explanation:
NEW QUESTION 194
Read the question, and then refer to the exhibit.
<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec 67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier
A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?
- A. The interface is administratively down.
- B. The interface is configured for a PVID of VLAN 1.
- C. The interface loopback is not set.
- D. The interface link-speed and duplex are unknown.
Answer: A
Explanation:
"<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP"
NEW QUESTION 195
Match each characteristic to the correct storage type.
Answer:
Explanation:
NEW QUESTION 196
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price.
They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements?
- A. Nimble CS1000
- B. Nimble SFA
- C. Nimble AF5000
- D. Nimble AF1000
Answer: B
NEW QUESTION 197
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 C (113 F).
Which additional option is required?
- A. High Performance Fan Kit
- B. 500W Flex Slot Platinum PS Kit
- C. M.2 Solid State Enablement Kit
- D. Gen10 Bezel Kit
Answer: A
NEW QUESTION 198
Match the storage technology to the storage type.
Answer:
Explanation:
Explanation
BLOCK = iSCSi
File = CIFS
BLOCK = SAN
File = NFS
NEW QUESTION 199
Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description:
Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length:
10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio:
100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?
- A. Configure the PVID of the interface to be VLAN 20.
- B. Permit VLAN 20 on the interface.
- C. Configure the interface as an IRF port.
- D. Configure the interface as an access port.
Answer: B
NEW QUESTION 200
......
HP HPE0-V14 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
2023 New Preparation Guide of HP HPE0-V14 Exam: https://www.torrentvalid.com/HPE0-V14-valid-braindumps-torrent.html
HPE0-V14 Exam Prep Guide: Prep guide for the HPE0-V14 Exam: https://drive.google.com/open?id=1fWDPhxptXSgXCX9f0zBgrcYII_WDij2S