[Feb 01, 2024] Get New 4A0-113 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant 4A0-113 Exam Questions PDF
Nokia OSPF routing protocol is a widely used protocol that is used in enterprise and service provider networks to enable efficient routing of IP traffic. The protocol is designed to provide fast convergence, load balancing, and scalability, making it an ideal choice for large and complex networks. The Nokia 4A0-113 exam is designed to test the skills and knowledge required to implement and manage OSPF in a variety of network environments.
NEW QUESTION # 23
A static route is created using the command "static-route 0.0.0.0/0 next-hop 3.3.3.1". What command could be used to test the static route on an Nokia 7750 SR?
- A. Ping static 0.0.0.0/0
- B. Ping 0.0.0.0
- C. Ping static 3.3.3.1
- D. Ping 3.3.3.1
Answer: D
NEW QUESTION # 24
Click on the exhibit.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. There are no stub or NSSA areas. Which of the following regarding LSAs is TRUE?
- A. Router R2 will receive Type 5 and Type 7 LSAs.
- B. Router R3 will advertise Type 7 LSAs to Area 0 and Area 2.
- C. Only routers R2 and R3 receive Type 5 LSAs advertised by router R1.
- D. Router R7 will receive Type 5 LSAs advertised by router R1.
Answer: D
NEW QUESTION # 25
What is the source IP address in an OSPF update?
- A. The system address of the router
- B. 224.0.0.6
- C. The unicast IP address of the interface the update is being sent on.
- D. 224.0.0.5
Answer: C
NEW QUESTION # 26
Click the exhibit button.
The OSPF adjacency between routers R3 and R1 is down. What is the problem?
- A. Area 1 of router R1 should not be configured as a stub.
- B. There is not enough information to tell.
- C. Router R3 has the incorrect authentication key type.
- D. Router R1 has the incorrect authentication key type.
Answer: D
NEW QUESTION # 27
Which of the following LSA types stay within an OSPF area, and are not flooded outside of the area? Choose two answers.
- A. Summary router LSA
- B. Type 5 (AS external) LSAs
- C. Router LSA
- D. Network LSA
C Summary network LSA
Answer: C,D
NEW QUESTION # 28
Which of the following statements best describes the function of an OSPF Type 4 LSA?
- A. A Type 4 LSA is originated by an ASBR to describe a route to itself to routers outside the area.
- B. A Type 4 LSA is originated by an ABR to describe a route to an ASBR to routers outside the area.
- C. A Type 4 LSA is originated by an ABR that is connected to a stub area. The LSA is injected into the stub area to provide routing information.
- D. A Type 4 LSA is originated by an ABR that is connected to a stub area. The LSA is injected into the backbone area to provide routing information.
Answer: B
NEW QUESTION # 29
Which of the following statements describe the major features of OSPF? Choose two answers.
- A. Traffic engineering extensions
- B. Cut through forwarding
- C. Route redistribution
- D. Fast reroute capability
- E. Control traffic prioritization
Answer: A,C
NEW QUESTION # 30
Exhibit
Given the two configurations shown, identify the two incorrect statements below: (Choose two)
- A. Metric values differ, but this does not prevent OSPF operation.
- B. The system interface is missing in one configuration so OSPF will not operate correctly.
- C. The interface type settings differ, but OSPF will still operate correctly.
- D. Both routers will generate OSPF Hello packets.
Answer: B,C
NEW QUESTION # 31
If a Router originates a type 1 router LSA with the E bit set what types of areas can it belong to? Select all that apply.
- A. Backbone Area
- B. Not So Stubby Area
- C. Standard Area
- D. Stub Area
Answer: A,B,C
NEW QUESTION # 32
Which of the following are similarities between OSPF and IS-IS? Choose two answers.
- A. Metric is based on hop count.
- B. Link state updates sent using layer 3 multicast.
- C. Support hierarchy through the use of areas.
- D. Support for CIDR.
- E. Slow convergence after link failures.
Answer: C,D
NEW QUESTION # 33
In which of the following types of areas does an OSPF router not set the E bit in its Type 1 LSA?
- A. Not so stubby area
- B. Backbone area
- C. Normal area
- D. Stub area
Answer: D
NEW QUESTION # 34
When are virtual links used in OSPF?
- A. When two areas are connected to area 0, but there is no direct path between them.
- B. When an area needs to connect directly to another area without using area 0.
- C. When two areas need to communicate and there is no area 0.
- D. When an area needs to traverse another area to reach area 0.
Answer: D
NEW QUESTION # 35
Static routing will be used in a network between a corporate head office, with many connected networks, and a branch office, with one connection to the head office. Which of the following best describes the likely configuration?
- A. The corporate head office router will have a default route and the branch site will have a more specific static route.
- B. The corporate head office router and the branch router will both have default routes.
- C. The corporate head office router and the branch office router will both have specific static routes.
- D. The corporate head office router will have a more specific static route and the branch office router will have a default route.
Answer: D
NEW QUESTION # 36
What is the metric and maximum routable value for RIP?
- A. Link cost and 15
- B. Link cost and 16
- C. Hop count and 16
- D. Hop count and 15
Answer: D
NEW QUESTION # 37
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that there are no stub networks, which of the following statements regarding Type 4 LSA generation is true?
- A. Router R3 generates a Type 4 LSA that is flooded to areas 0 and 2.
- B. Router R3 generates a Type 4 LSA that is flooded to areas 0, 1, and 2.
- C. Router R3 generates a Type 4 LSA that is flooded to area 0, and router R6 generates a Type 4 LSA that is flooded to area 2.
- D. Router R1 generates a Type 4 LSA that is flooded to areas 0, 1, and 2.
Answer: C
NEW QUESTION # 38
Which of the LSA types stay within an OSPF area and are not exported outside of the area? (Choose all that apply)
- A. Summary Router LSA
- B. Summary Network LSA
- C. Router LSA
- D. Network LSA
Answer: C,D
NEW QUESTION # 39
Select the answer below that correctly lists the 5 different OSPF packet types.
- A. Hello, Link State Update, Link State Packet, Link State Acknowledgement, Database Descriptor
- B. Hello, Link State Refresh, Link State Update, Link State Acknowledgement, Link State Authentication
- C. Link State Update, Link State Refresh, Link State Acknowledgement, Database Descriptor, Notification
- D. Hello, Link State Update, Link State Request, Link State Acknowledgement, Database Descriptor
Answer: D
NEW QUESTION # 40
An OSPF adjacency is stuck in the exstart state. What is the most likely cause?
- A. The MTU does not match on both interfaces.
- B. An OSPF Hello has not been received from the neighbor.
- C. The interfaces are configured as point-to-point on one side and broadcast on the other.
- D. OSPF is not enabled on one of the routers.
- E. The router ID is the same on both routers.
Answer: A
NEW QUESTION # 41
Which one of the commands below will create a static route to network 2.3.4.0/24 on the AlcatelLucent 7750 SR router?
- A. Static route 2.3.4.0/24 next hop 3.4.5.6
- B. Static route 2.3.4.0 255.255.255.0 next hop 3.4.5.6
- C. Static-route next-hop 3.4.5.6 2.3.4.0/24
- D. Static-route 2.3.4.0/24 next-hop 3.4.5.6
Answer: D
NEW QUESTION # 42
What is the default preference value for a static route in the Nokia 7750 SR router?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 43
What are the default Hello and Dead timer intervals for OSPF on the Nokia 7750 SR?
- A. 10 and 40 seconds
- B. 5 and 20 seconds
- C. 5 and 15 seconds
- D. 10 and 30 seconds
Answer: A
NEW QUESTION # 44
Identify two attributes of Distance Vector Protocols: (Choose two)
- A. Maintain multiple databases: neighbor, topology and routing.
- B. Send information about directly connected links to neighbors at periodic intervals.
- C. Use split horizon by default.
- D. Use holddown timers when topologies change to allow for convergence.
Answer: C,D
NEW QUESTION # 45
......
Nokia 4A0-113 exam covers a range of topics related to OSPF, including the basics of OSPF configuration, OSPF network types, route redistribution, virtual links, and OSPFv3. 4A0-113 exam is intended for professionals who have experience with Nokia Service Routing Operating System (SROS) and are familiar with basic networking concepts.
OSPF is a widely used routing protocol that enables efficient and scalable routing in IP networks. It is an interior gateway protocol (IGP) that is used to distribute routing information within a single autonomous system (AS). Nokia is one of the leading providers of networking equipment, and their routers support OSPF as a routing protocol.
Free 4A0-113 braindumps download: https://www.torrentvalid.com/4A0-113-valid-braindumps-torrent.html
4A0-113 Dumps 2024 - NewNokia Exam Questions: https://drive.google.com/open?id=1M21ILc-Kk5OF13yJX76vIDo6scUrx1YN