Authentic Best resources for MD-100 Test Engine Practice Exam
[2021] MD-100 PDF Questions - Perfect Prospect To Go With TorrentValid Practice Exam
NEW QUESTION 38
You have a computer named Computer1 that runs Windows 10. Computer1 has an IP address of 10.10.1.200 and a subnet mask of 255.255.255.0.
You configure the proxy settings on Computer1 as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://www.howtogeek.com/tips/how-to-set-your-proxy-settings-in-windows-8.1/
NEW QUESTION 39
You have two computers named Computer1 and Computer2 that run Windows 10. The computers are in a workgroup.
You perform the following configurations on Computer1:
Create a user named User1.
Add User1 to the Remote Desktop Users group.
You perform the following configurations on Computer2:
Create a user named User1 and specify the same user password as the one set on Computer1.
Create a share named Share2 and grant User1 Full control access to Share2.
Enable Remote Desktop.
What are the effects of the configurations? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 40
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.
Computer1 has apps that are compatible with Windows 10.
You need to perform a Windows 10 in-place upgrade on Computer1.
Solution: You add Windows 10 startup and install images to a Windows Deployment Services (WDS) server.
You start Computer1 by using WDS and PXE, and then you initiate the Windows 10 installation.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Use Microsoft Deployment Toolkit (MDT) instead.
NEW QUESTION 41
You are a network administrator at your company.
A user attempts to start a computer and receives the following error message: "Bootmgr is missing." You need to resolve the issue.
You start the computer in the recovery mode.
Which command should you run next? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://neosmart.net/wiki/bootmgr-is-missing/
NEW QUESTION 42
You have a computer named Computer1 that runs Windows 10 and is joined to an Active Directory domain named adatum.com.
A user named Admin1 signs in to Computer1 and runs the whoami command as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 43
You have 15 computers that run Windows 10. Each computer has two network interfaces named Interface1 and Interface2.
You need to ensure that network traffic uses Interface1, unless Interface1 is unavailable.
What should you do?
- A. From Network Connections in Control Panel, modify the Provider Order.
- B. Run the Set-NetAdapterBinding -Name Interface2 -Enabled $true -ComponentID ms_tcpip -ThrottleLimit 0command.
- C. Run the Set-NetIPInterface -InterfaceAlias Interface1 -InterfaceMetric 1command.
- D. Set a static IP address on Interface 1.
Answer: C
Explanation:
Explanation/Reference:
References:
https://tradingtechnologies.atlassian.net/wiki/spaces/KB/pages/27439127/How+to+Change+Network+Adapter
+Priorities+in+Windows+10
https://docs.microsoft.com/en-us/powershell/module/nettcpip/set-netipinterface?view=win10-ps
NEW QUESTION 44
You have a computer that runs Windows 10 and contains the folders shown in the following table.
You create the groups shown in the following table.
On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 45
Your network contains an Active Directory domain that contains the objects shown in the following table.
Computer1 contains the shared folders shown in the following table.
The computers have the network configurations shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 46
You have a computer that runs Windows 10 and contains the folders shown in the following table.
You create the groups shown in the following table.
On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 47
You have a workgroup computer named Computer1 that runs Windows 10. Computer1 has the user accounts shown in the following table.
User3, User4, and Administrator sign in and sign out on Computer1. User1 and User2 have never signed in to Computer1.
You are troubleshooting policy issues on Computer1. You sign in to Computer1 as Administrator.
You add the Resultant Set of Policy (RsoP) snap-in to an MMC console.
Which users will be able to sign in on Computer1?
- A. User1, User3, and User4 only
- B. User3, User4, and Administrator only
- C. Administrator only
- D. Use1, User2, User3, User4, and Administrator
Answer: B
Explanation:
Explanation
The Interactive logon: Number of previous logons to cache (in case domain controller is not available) policy setting determines whether a user can log on to a Windows domain by using cached account information.
Logon information for domain accounts can be cached locally so that, if a domain controller cannot be contacted on subsequent logons, a user can still log on.
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/interactive-logon-nu
NEW QUESTION 48
You need to take remote control of an employee's computer to troubleshoot an issue.
What should you send to the employee to initiate a remote session?
- A. a connection file
- B. an Easy Connect request
- C. a numeric security code
- D. a password
Answer: C
Explanation:
Explanation
References:
https://support.microsoft.com/en-us/help/4027243/windows-10-solve-pc-problems-with-quick-assist
NEW QUESTION 49
You have a computer named Computer5 that runs Windows 10 that is used to share documents in a workgroup.
You create three users named User-a, User-b, User-c. The users plan to access Computer5 from the network only.
You have a folder named Data. The Advanced Security Settings for the Data folder are shown in the Security exhibit. (Click the Security Exhibit tab).
You share the Data folder. The permission for User-a are shown in the User-a exhibit (Click the User-a tab.)
The permissions for user-b are shown in the User-b exhibit. (Click the User-b tab.)
The permissions for user-c are shown in the User-c exhibit. (Click the tab.)
For each of the following statements, select Yes if the statements is true. Otherwise, select No.
NOTE: Reach correct selection is worth one point.
Answer:
Explanation:
Explanation
No No Yes
NEW QUESTION 50
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains a user named UserA.
You have two computers named Computer1 and Computer2 that run Windows 10 and are joined to contoso.com.
You need to ensure that UserA can connect to Computer2 from Computer1 by using Remote Desktop.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. On Computer1, modify the registry.
- B. On Computer1, enable Remote Desktop.
- C. On Computer1, modify the properties of UserA.
- D. On Computer1, add the Everyone group to the Remote Desktop Users group.
- E. On Computer2, modify the registry.
- F. On Computer 2, enable Remote Desktop.
- G. On Computer2, add the Everyone group to the Remote Desktop Users group.
- H. On Computer2, modify the properties of UserA.
Answer: F,G,H
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/windows/client-management/connect-to-remote-aadj-pc
NEW QUESTION 51
A user has a computer that runs Windows 10.
When the user connects the computer to the corporate network, the user cannot access the internal corporate servers. The user can access servers on the Internet.
You run the ipconfig command and receive the following output.
You send a ping request and successfully ping the default gateway, the DNS servers, and the DHCP server.
Which configuration on the computer causes the issue?
- A. the IPv4 address
- B. the default gateway address
- C. the subnet mask
- D. the DNS servers
Answer: D
NEW QUESTION 52
Your network contains an Active Directory domain. The domain contains a group named Group1.
All the computers in the domain run Windows 10. Each computer contains a folder named C:\Documents that has the default NTFS permissions set.
You add a folder named C:\Documents\Templates to each computer.
You need to configure the NTFS permissions to meet the following requirements:
How should you configure the NTFS settings on the Templates folder? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 53
......
Best updated resource for MD-100 Online Practice Exam: https://www.torrentvalid.com/MD-100-valid-braindumps-torrent.html
Realistic Practice MD-100 Windows 10 Exam Braindumps: https://drive.google.com/open?id=1Z6ZF7VLyj_vmTSR87Wy-mBOuoyICqWl7