56 Q&As in UPDATED DES-DD23 Exam Questions Certification Test Engine to PDF
Get The Important Preparation Guide With DES-DD23 Dumps
NEW QUESTION # 14
Which command is used to check if NFS is enabled?
- A. system show
- B. nfs status
- C. nfs show clients
- D. nfs enable
Answer: C
NEW QUESTION # 15
Which enterprise applications does the DDBEA agent support?
- A. Microsoft SQL, Sharepoint, and Exchange servers
- B. IBM DB2, Microsoft SQL, and SAP HANA
- C. SAP with Oracle, IBM DB2, and Microsoft active directory
- D. Oracle, Microsoft Sharepoint, and Microsoft SQL
Answer: B
NEW QUESTION # 16
What are some possible network bottlenecks for a PowerProtect DD?
- A. Routing protocols, switches and routers, and wire speeds
- B. Connectivity, firewalls, and routing protocols
- C. Connectivity, routing protocols, and configuration
- D. Configuration, wire speeds, switches and routers
Answer: A
Explanation:
Some possible bottlenecks are:
1- Clients
* Disk Issues
* Configuration
* Connectivity
2- Network
* Wire speeds
* Switches and routers
* Routing protocols and firewalls
3- Backup Server
* Configuration
* Load
* Connectivity
4- Data Domain System
* Connectivity
* Configuration
* Log level set too high
NEW QUESTION # 17
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server HBA are visible?
- A. scsitarget initiator show list
- B. scsitarget show initiator list
- C. scsitarget initiator list
- D. scsitarget show initiator
Answer: A
NEW QUESTION # 18
What are some key benefits of performing backups and recoveries with a PowerProtect DD appliance?
- A. Increase in the overall size and scope Elimination of physical tape Number of copies that do not need to be tracked Increased speed of disaster recovery
- B. Reduction in the overall size and scope Elimination of physical tape Fewer copies that need to be tracked Increased speed of disaster recovery
- C. Reduction in the overall size and scope Elimination of physical tape Number of copies that do not need to be tracked Increased speed of disaster recovery
- D. Increase in the overall size and scope Elimination of physical tape Fewer copies that need to be tracked Increased speed of disaster recovery
Answer: D
NEW QUESTION # 19
A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state.
As a best practice, at what percentage of disk utilization should action be taken?
- A. 95%
- B. 80%
- C. 70%
- D. 60%
Answer: B
NEW QUESTION # 20
An administrator is configuring an Azure cloud unit on their DD6900. Which certificate must be imported before adding the cloud unit?
- A. GlobalSign Root R2
- B. S3 Flexible
- C. Baltimore CyberTrust Root CA
- D. GlobalSign Root R1
Answer: C
NEW QUESTION # 21
The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3.
Which data movement policy is used to archive files into Azure Blob Storage?
- A. Age-based
- B. Recall
- C. Age-range
- D. App-driven
Answer: A
NEW QUESTION # 22
When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically.
Which command can be used to start the script manually?
- A. config wizard
- B. configure terminal
- C. config setup
- D. setup config
Answer: C
NEW QUESTION # 23
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900. Which compression algorithm will they see enabled by default?
- A. lz
- B. lzw
- C. gz
- D. gzfast
Answer: D
NEW QUESTION # 24
Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?
- A. Master Server
- B. Media Server
- C. Media Agent
- D. Spectrum Protect Server
Answer: C
NEW QUESTION # 25
Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?
- A. 2051/UDP
- B. 514/UDP
- C. 2051/TCP
- D. 514/TCP
Answer: B
NEW QUESTION # 26
Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?
- A. HTTP and HTTPS
- B. FTP and FTPS
- C. VTL and DD Boost
- D. CIFS and NFS
Answer: D
NEW QUESTION # 27
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. yes and nfs_rfc1323=0
- B. no and nfs_rfc1323=1
- C. yes and nfs_rfc1323=1
- D. no and nfs_rfc1323=0
Answer: B
Explanation:
To optimize TCP/IP performance on the AIX host, set large_send to no for each NIC interface.
NEW QUESTION # 28
What are the steps to configure the Retention Lock Compliance?
Answer:
Explanation:
Reference:
https://datastorageasean.com/sites/default/files/EMC-data-domain-retention-lock-wp.pdf
NEW QUESTION # 29
What are some key benefits of performing backups and recoveries with a PowerProtect DD appliance?
- A. Increase in the overall size and scope Elimination of physical tape
Number of copies that do not need to be tracked Increased speed of disaster recovery - B. Increase in the overall size and scope Elimination of physical tape
Fewer copies that need to be tracked Increased speed of disaster recovery - C. Reduction in the overall size and scope Elimination of physical tape Fewer copies that need to be tracked Increased speed of disaster recovery
- D. Reduction in the overall size and scope Elimination of physical tape Number of copies that do not need to be tracked Increased speed of disaster recovery
Answer: B
NEW QUESTION # 30
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?
- A. Vaulted
- B. Archived
- C. Offline
- D. Offsite
Answer: D
Explanation:
Once in the cloud tier vault, the backup server maintains the tape status to be "Offsite."
NEW QUESTION # 31
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.
What is causing these drives to be inaccessible?
- A. There are not enough cache drives on the DD9400 to support the extra capacity.
- B. A second SAS connection from DD9400 to DS60 is not activated.
- C. The capacity license applied is only for 30 drives.
- D. There are not enough spare drives.
Answer: C
Explanation:
The DS60 ships with 60 drives installed. Depending on the capacity license applied to the PowerProtect DD system either 15, 30, 45, or 60 drives will be accessible
NEW QUESTION # 32
What is the order of steps to configure DD Boost on the backup host?
Answer:
Explanation:
NEW QUESTION # 33
What is a requirement to configure the PowerProtect DD tape out to cloud feature?
- A. Tape Out to Cloud License
- B. Cloud Tier Capacity License
- C. DDVE in the Cloud
- D. Two cloud units
Answer: B
Explanation:
DD VTL supports storing the VTL vault on Cloud Tier storage. To use this functionality, the protection system must be a supported Cloud Tier configuration, and have a Cloud Tier license in addition to the VTL license.
NEW QUESTION # 34
Refer to the exhibit.
Match each action to its call-out location.
Answer:
Explanation:
NEW QUESTION # 35
......
Prepare With Top Rated High-quality DES-DD23 Dumps For Success in Exam: https://www.torrentvalid.com/DES-DD23-valid-braindumps-torrent.html
Get Totally Free Updates on DES-DD23 Dumps PDF Questions: https://drive.google.com/open?id=1oAndEFOfCBJKUpqqYW_9RTrHX-FLa-bo