2025 Provide Updated CheckPoint 156-215.81 Dumps as Practice Test and PDF
156-215.81 Dumps are Available for Instant Access
What is the scope of the CheckPoint 156-215.81 Exam?
The CheckPoint 156-215.81 exam is a certification exam, which will allow you to prove your knowledge of the subject area. It is a must have for anyone who wants to work in the IT industry and it can also help you get a job in various companies.
The CheckPoint 156-215.81 exam covers all major concepts and topics related to the CheckPoint Certified Security Administrator R81 certification, so if you want to become a Certified Security Administrator, you need to take this exam first. CheckPoint 156-215.81 exam dumps is designed to help you pass the exam and gain the knowledge and skills needed to become a Certified Security Administrator.
CheckPoint 156-215.81 exam is ideal for network administrators, security engineers, and IT professionals who are responsible for securing their organization's network infrastructure. 156-215.81 exam tests the candidate's knowledge of firewall architecture, VPNs, and network security policies, among other topics. Passing the exam validates the candidate's ability to manage network security, prevent threats, and reduce vulnerabilities.
NEW QUESTION # 160
Under which file is the proxy arp configuration stored?
- A. $FWDIR/state/proxy_arp.conf on the management server
- B. $FWDIR/conf/local.arp on the gateway
- C. $FWDIR/conf/local.arp on the management server
- D. $FWDIR/state/_tmp/proxy.arp on the security gateway
Answer: B
NEW QUESTION # 161
CPU-level of your Security gateway is peaking to 100% causing problems with traffic. You suspect that the problem might be the Threat Prevention settings.
The following Threat Prevention Profile has been created.
How could you tune the profile in order to lower the CPU load still maintaining security at good level? Select the BEST answer.
- A. Set High Confidence to Low and Low Confidence to Inactive.
- B. Set the Performance Impact to Very Low Confidence to Prevent.
- C. Set the Performance Impact to Medium or lower.
- D. The problem is not with the Threat Prevention Profile. Consider adding more memory to the appliance.
Answer: C
Explanation:
The BEST way to tune the profile in order to lower the CPU load still maintaining security at good level is to set the Performance Impact to Medium or lower. This will reduce the number of packets that are inspected by the Threat Prevention blades, while still providing a high level of protection . Setting High Confidence to Low and Low Confidence to Inactive will lower the security level, as it will allow more traffic that may be malicious. The problem is likely with the Threat Prevention Profile, as it can have a significant impact on the CPU utilization of the Security Gateway. Adding more memory to the appliance will not solve the problem, as memory is not the bottleneck in this case. Setting the Performance Impact to Very Low Confidence to Prevent will increase the CPU load, as it will inspect more packets and block more traffic that may be false positives.
References: Threat Prevention Administration Guide, Check Point R81.10
NEW QUESTION # 162
Which path below is available only when CoreXL is enabled?
- A. Accelerated path
- B. Firewall path
- C. Medium path
- D. Slow path
Answer: C
NEW QUESTION # 163
When configuring Spoof Tracking, which tracking actions can an administrator select to be done when spoofed packets are detected?
- A. Log, alert, none
- B. Log, allow packets, email
- C. Log, send snmp trap, email
- D. Drop packet, alert, none
Answer: A
Explanation:
The tracking actions that can be selected when configuring Spoof Tracking are Log, alert, none. Spoof Tracking is a feature that detects packets with spoofed source IP addresses and logs them in SmartView Tracker. The administrator can choose to log only, log and alert, or do nothing when spoofed packets are detected. The other options are not valid tracking actions for Spoof Tracking, as they are either not available or not relevant for this feature.
References: [Spoof Tracking], [Firewall Administration Guide]
NEW QUESTION # 164
A stateful inspection firewall works by registering connection data and compiling this information. Where is the information stored?
- A. In the Sessions table.
- B. In State tables.
- C. In a CSV file on the firewall hard drive located in $FWDIR/conf/.
- D. In the system SMEM memory pool.
Answer: B
Explanation:
The information stored in the state tables provides cumulative data that can be used to evaluate future connections...... https://www.checkpoint.com/cyber-hub/network-security/what-is-firewall/what-is-a-stateful-firewall/
NEW QUESTION # 165
Which method below is NOT one of the ways to communicate using the Management API's?
- A. Sending API commands over an http connection using web-services
- B. Typing API commands using the "mgmt_cli" command
- C. Typing API commands using Gaia's secure shell (clash)19+
- D. Typing API commands from a dialog box inside the SmartConsole GUI application
Answer: A
Explanation:
Explanation
The correct answer is D because sending API commands over an http connection using web-services is not one of the ways to communicate using the Management API's3. The Management API's support HTTPS protocol only, not HTTP3. The other methods are valid ways to communicate using the Management API's3.
References: Check Point Learning and Training Frequently Asked Questions (FAQs)
NEW QUESTION # 166
In the R80 SmartConsole, on which tab are Permissions and Administrators defined?
- A. Security Policies
- B. Manage and Settings
- C. Logs and Monitor
- D. Gateway and Servers
Answer: B
NEW QUESTION # 167
How are the backups stored in Check Point appliances?
- A. Saved as*.tar under /var/log/CPbackup/backups
- B. Saved as*tgz under /var/log/CPbackup/backups
- C. Saved as*tar under /var/CPbackup
- D. Saved as*tgz under /var/CPbackup
Answer: D
Explanation:
Explanation
The backups are stored in Check Point appliances as *.tgz files under /var/CPbackup. This is the default location for backup files created by the backup command. Therefore, the correct answer is B. Saved as *.tgz under /var/CPbackup
NEW QUESTION # 168
Consider the Global Properties following settings:
The selected option "Accept Domain Name over UDP (Queries)" means:
- A. All UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done before first explicit rule written by Administrator in a Security Policy.
- B. UDP Queries will be accepted by the traffic allowed only through interfaces with external anti-spoofing topology and this will be done before first explicit rule written by Administrator in a Security Policy.
- C. All UDP Queries will be accepted by the traffic allowed by first explicit rule written by Administrator in a Security Policy.
- D. No UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done before first explicit rule written by Administrator in a Security Policy.
Answer: B
Explanation:
The selected option "Accept Domain Name over UDP (Queries)" means that UDP Queries will be accepted by the traffic allowed only through interfaces with external anti-spoofing topology and this will be done before first explicit rule written by Administrator in a Security Policy. This option enables the Security Gateway to accept DNS queries from external hosts and forward them to internal DNS servers. The queries are accepted by an implied rule that is applied before the explicit rules in the Security Policy. The implied rule only allows queries from interfaces that have external anti-spoofing groups defined . References: Check Point R81 Quantum Security Gateway Guide, Implied Rules
NEW QUESTION # 169
Which backup utility captures the most information and tends to create the largest archives?
- A. snapshot
- B. backup
- C. Database Revision
- D. migrate export
Answer: A
Explanation:
Snapshot is the backup utility that captures the most information and tends to create the largest archives.
Snapshot creates an image of the entire system, including operating system files, configuration files, databases, and logs. It can be used to restore the system in case of a failure or corruption. Backup creates a compressed file that contains configuration files and databases, but not operating system files or logs. It can be used to restore configuration settings and policies. Database Revision creates a backup of only the database files that store policies and objects. It can be used to revert to a previous revision of the database. Migrate export creates a compressed file that contains configuration files, databases, and logs, but not operating system files. It can be used to migrate data from one machine to another with different hardware or software versions.References: [Backup and Restore], [Database Revision Control], [Migrate Tools], [Hewlett Packard Enterprise Support Center]
NEW QUESTION # 170
Fill in the blanks: A Security Policy is created in_____, stored in the_____ and Distributed to the various
- A. The Check Point database. SmartConsole, Security Gateways
- B. SmartConsole, Security Gateway, Security Management Servers
- C. SmartConsole, Security Management Server, Security Gateways
- D. Rule base. Security Management Server Security Gateways
Answer: C
Explanation:
Explanation
A Security Policy is created in SmartConsole, stored in the Security Management Server, and distributed to the various Security Gateways. SmartConsole is a graphical user interface that allows administrators to create and edit security policies. The Security Management Server is a central server that stores and manages the security policies. The Security Gateways are devices that enforce the security policies on the network traffic.
References: : Check Point R81 Security Gateway Administration Guide, page 9.
NEW QUESTION # 171
When configuring LDAP with User Directory integration, changes applied to a User Directory template are:
- A. Not reflected for any users unless the local user template is changed.
- B. Reflected for ail users who are using that template and if the local user template is changed as well.
- C. Reflected immediately for all users who are using that template.
- D. Not reflected for any users who are using that template.
Answer: C
Explanation:
LDAP (Lightweight Directory Access Protocol) is a protocol that allows accessing and maintaining distributed directory information services over a network. User Directory integration is a feature of Identity Awareness that allows Check Point products to use LDAP servers as identity sources. When configuring LDAP with User Directory integration, changes applied to a User Directory template are reflected immediately for all users who are using that template. A User Directory template defines the settings for connecting to an LDAP server and retrieving user information3. References: Check Point R81 Identity Awareness Administration Guide
NEW QUESTION # 172
You want to define a selected administrator's permission to edit a layer. However, when you click the + sign in the "Select additional profile that will be able edit this layer" you do not see anything.
What is the most likely cause of this problem? Select the BEST answer.
- A. There are no permission profiles available and you need to create one first.
- B. "Edit layers by selected profiles in a layer editor" is unselected in the Permission profile.
- C. "Edit layers by Software Blades" is unselected in the Permission Profile
- D. All permission profiles are in use.
Answer: A
NEW QUESTION # 173
Most Check Point deployments use Gaia but which product deployment utilizes special Check Point code (with unification in R81.10)?
- A. Enterprise Network Security Appliances
- B. Scalable Platforms
- C. Rugged Appliances
- D. Small Business and Branch Office Appliances
Answer: B
Explanation:
Explanation
Most Check Point deployments use Gaia, which is a unified operating system for all Check Point appliances, open servers, and virtualized gateways. However, some product deployments utilize special Check Point code, such as Scalable Platforms (formerly known as Maestro), which are high-performance security gateways that can scale up to 1.5 Tbps of firewall throughput. Scalable Platforms use a special version of Gaia OS called Gaia Embedded, which is planned to be unified with Gaia OS in R81.102. References: Check Point R81 Release Notes
NEW QUESTION # 174
When you upload a package or license to the appropriate repository in SmartUpdate. where is the package or license stored?
- A. Security Gateway
- B. SmartConsole installed device
- C. Check Point user center
- D. Security Management Server
Answer: D
NEW QUESTION # 175
......
Updated 156-215.81 Dumps Questions For CheckPoint Exam: https://www.torrentvalid.com/156-215.81-valid-braindumps-torrent.html
Valid 156-215.81 Dumps for Helping Passing 156-215.81 Exam!: https://drive.google.com/open?id=11ipkcmBoINJjKP4No0gqteBtal6R9aAM