2024 Valid SPLK-1002 Real Exam Questions, practice Splunk Core Certified Power User
Latest Success Metrics For Actual SPLK-1002 Exam (Updated 250 Questions)
The SPLK-1002 certification is a valuable credential that can help professionals to advance their careers in the field of data analytics. Splunk Core Certified Power User Exam certification is recognized by employers worldwide, and it demonstrates that the holder has the skills and knowledge needed to use Splunk to collect, analyze and visualize data efficiently. By passing the SPLK-1002 exam, professionals can demonstrate their expertise in using Splunk to solve complex data problems, and they can position themselves for career growth and advancement.
NEW QUESTION # 88
When using timechart, how many fields can be listed after a by clause?
- A. because _time is already implied as the x-axis.
- B. because timechart doesn't support using a by clause.
- C. There is no limit specific to timechart.
- D. because one field would represent the x-axis and the other would represent the y-axis.
Answer: A
Explanation:
Explanation
The timechart command is used to create a time-series chart of statistical values based on your search results2. You can use the timechart command with a by clause to split the results by one or more fields and create multiple series in the chart2. However, you can only list one field after the by clause when using the timechart command because _time is already implied as the x-axis of the chart2. Therefore, option B is correct, while options A, C and D are incorrect.
NEW QUESTION # 89
What does the transaction command do?
- A. Separates two events based on one or more values.
- B. Groups a set of transactions based on time.
- C. Returns the number of credit card transactions found in the event logs.
- D. Creates a single event from a group of events.
Answer: D
Explanation:
Explanation
The transaction command is a search command that creates a single event from a group of events that share some common characteristics. The transaction command can group events based on fields, time, or both. The transaction command can also create some additional fields for each transaction, such as duration, eventcount, startime, etc. The transaction command does not group a set of transactions based on time, but rather groups a set of events into a transaction based on time. The transaction command does not separate two events based on one or more values, but rather joins multiple events based on one or more values.
The transaction command does not return the number of credit card transactions found in the event logs, but rather creates transactions from the events that match the search criteria.
NEW QUESTION # 90
Which workflow action method can be used the action type is set to link?
- A. Search
- B. PUT
- C. UPDATE
- D. GET
Answer: D
Explanation:
Explanation
https://docs.splunk.com/Documentation/Splunk/8.0.2/Knowledge/SetupaGETworkflowaction Define a GET workflow action Steps
* Navigate to Settings > Fields
* Click New to open up a new workflow action form.
* Define a Label for the action.
The Label field enables you to define the text that is displayed in either the field or event workflow menu.
Labels can be static or include the value of relevant fields.
* Determine whether the workflow action applies to specific fields or event types in your data.
Use Apply only to the following fields to identify one or more fields. When you identify fields, the workflow action only appears for events that have those fields, either in their event menu or field menus. If you leave it blank or enter an asterisk the action appears in menus for all fields.
Use Apply only to the following event types to identify one or more event types. If you identify an event type, the workflow action only appears in the event menus for events that belong to the event type.
* For Show action in determine whether you want the action to appear in the Event menu, the Fields menus, or Both.
* Set Action type to link.
* In URI provide a URI for the location of the external resource that you want to send your field values to.
Similar to the Label setting, when you declare the value of a field, you use the name of the field enclosed by dollar signs.
Variables passed in GET actions via URIs are automatically URL encoded during transmission. This means you can include values that have spaces between words or punctuation characters.
* Under Open link in, determine whether the workflow action displays in the current window or if it opens the link in a new window.
* Set the Link method to get
* Click Save to save your workflow action definition.
NEW QUESTION # 91
Highlighted search terms indicate _________ search results in Splunk.
- A. Display as selected fields.
- B. Sorted
- C. Matching
- D. Charted based on time
Answer: C
NEW QUESTION # 92
Complete the search, .... | _____ failure>successes
- A. If
- B. Any of the above
- C. Search
- D. Where
Answer: D
Explanation:
The where command can be used to complete the search below.
... | where failure>successes
The where command is a search command that allows you to filter events based on complex or custom criteri a. The where command can use any boolean expression or function to evaluate each event and determine whether to keep it or discard it. The where command can also compare fields or perform calculations on fields using operators such as >, <, =, +, -, etc. The where command can be used after any transforming command that creates a table or a chart.
The search string below does the following:
It uses ... to represent any search criteria or commands before the where command.
It uses the where command to filter events based on a comparison between two fields: failure and successes.
It uses the greater than operator (>) to compare the values of failure and successes fields for each event.
It only keeps events where failure is greater than successes.
NEW QUESTION # 93
Which of the following eval command functions is valid?
- A. count()
- B. int()
- C. tostring()
- D. print()
Answer: C
Explanation:
Explanation
https://docs.splunk.com/Documentation/Splunk/latest/SearchReference/CommonEvalFunctions
NEW QUESTION # 94
Which workflow uses field values to perform a secondary search?
- A. Sub-Search
- B. Action
- C. POST
- D. Search
Answer: D
Explanation:
Explanation
https://docs.splunk.com/Documentation/Splunk/8.0.2/Knowledge/CreateworkflowactionsinSplunkWeb
NEW QUESTION # 95
Splunk alerts can be based on search that run______. (Select all that apply.)
- A. in real-time
- B. on a regular schedule
- C. and have no matching events
Answer: A,B
Explanation:
Splunk alerts can be based on searches that run in real-time or on a regular schedule3. An alert is a way to monitor your data and get notified when certain conditions are met3. You can create an alert by specifying a search and a triggering condition3. You can also specify how often you want to run the search and how you want to receive the alert notifications3. You can run the alert search in real-time, which means that it continuously monitors your data as it streams into Splunk3. Alternatively, you can run the alert search on a regular schedule, which means that it runs at fixed intervals such as every hour or every day3. Therefore, options A and B are correct, while option C is incorrect because it is not a way to run an alert search.
NEW QUESTION # 96
When should you use the transaction command instead of the scats command?
- A. When duration is irrelevant in search results. .
- B. When you have over 1000 events in a transaction.
- C. When you need to group on multiple values.
- D. When you need to group based on start and end constraints.
Answer: D
Explanation:
The transaction command is used to group events into transactions based on some common characteristics, such as fields, time, or both. The transaction command can also specify start and end constraints for the transactions, such as a field value that indicates the beginning or the end of a transaction. The stats command is used to calculate summary statistics on the events, such as count, sum, average, etc. The stats command cannot group events based on start and end constraints, but only on fields or time buckets. Therefore, the transaction command should be used instead of the stats command when you need to group events based on start and end constraints.
NEW QUESTION # 97
Which of the following searches would create a graph similar to the one below?
- A. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | start count states
- B. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | timechart count by status
- C. None of these searches would generate a similart graph.
- D. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | chart count states by -time
Answer: B
NEW QUESTION # 98
Which of the following about reports is/are true?
- A. Reports are knowledge objects.
- B. All of the above.
- C. Reports can be scheduled.
- D. Reports can run a script.
Answer: B
Explanation:
A report is a way to save a search and its results in a format that you can reuse and share with others2. A report is also a type of knowledge object, which is an entity that you create to add knowledge to your data and make it easier to search and analyze2. Therefore, option A is correct. A report can be scheduled, which means that you can configure it to run at regular intervals and send the results to yourself or others via email or other methods2. Therefore, option B is correct. A report can run a script, which means that you can specify a script file to execute when the report runs and use it to perform custom actions or integrations2. Therefore, option C is correct. Therefore, option D is correct because all of the above statements are true for reports.
NEW QUESTION # 99
Based on the macro definition shown below, what is the correct way to execute the macro in a search string?
- A. 'convert_sales(euro,€,.79)'
- B. "convert_sales(euro,€,.79)"
- C. "convert_sales($euro$,$€$,$.79$)"
- D. 'convert_sales($euro$,$€$,$.79$)'
Answer: A
Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/8.0.3/Knowledge/Usesearchmacros
NEW QUESTION # 100
Which of the following statements describes this search?
sourcetype=access_combined I transaction JSESSIONID | timechart avg (duration)
- A. No results will be returned because the transaction command must include the startswith and endswith options.
- B. No results will be returned because the transaction command must be the last command used in the search pipeline.
- C. This is a valid search and will display a timechart of the average duration, of each transaction event.
- D. This is a valid search and will display a stats table showing the maximum pause among transactions.
Answer: C
NEW QUESTION # 101
Which of the following file formats can be extracted using a delimiter field extraction?
- A. XML
- B. CSV
- C. JSON
- D. PDF
Answer: B
NEW QUESTION # 102
Data model are composed of one or more of which of the following datasets? (select all that apply.)
- A. Events datasets
- B. Search datasets
- C. Any child of event, transaction, and search datasets
- D. Transaction datasets
Answer: A,B,D
NEW QUESTION # 103
Which of the following is included with the Common Information Model (CIM) add-on?
- A. tsidx files
- B. Event category tags
- C. Workflow actions
- D. Search macros
Answer: B
Explanation:
The correct answer is B. Event category tags. This is because the CIM add-on contains a collection of
preconfigured data models that you can apply to your data at search time. Each data model in the CIM consists
of a set of field names and tags that define the least common denominator of a domain of interest. Event
category tags are used to classify events into high-level categories, such as authentication, network traffic, or
web activity. You can use these tags to filter and analyze events based on their category.You can learn more
about event category tags from the Splunk documentation12. The other options are incorrect because they are
not included with the CIM add-on. Search macros are reusable pieces of search syntax that you can invoke
from other searches. They are not specific to the CIM add-on, although some Splunk apps may provide their
own search macros. Workflow actions are custom links or scripts that you can run on specific fields or events.
They are also not specific to the CIM add-on, although some Splunk apps may provide their own workflow
actions. tsidx files are index files that store the terms and pointers to the raw data in Splunk buckets. They are
part of the Splunk indexing process and have nothing to do with the CIM add-on.
NEW QUESTION # 104
Pivot editor enables users to quickly reports but they must use the pivot command.'
- A. False
- B. True
Answer: A
NEW QUESTION # 105
In which of the following scenarios is an event type more effective than a saved search?
- A. When formatting needs to be included with the search string.
- B. When a search needs to be added to other users' dashboards.
- C. When the search string needs to be used in future searches.
- D. When a search should always include the same time range.
Answer: B
Explanation:
Reference:
https://answers.splunk.com/answers/4993/eventtype-vs-saved-search.html
NEW QUESTION # 106
What does the fillnull command replace null values with, if the value argument is not specified?
- A. NULL
- B. N/A
- C. 0
- D. NaN
Answer: C
Explanation:
The fillnull command replaces null values with 0 by default, if the value argument is not specified. You can
use the value argument to specify a different value to replace null values with, such as N/A or NULL.
NEW QUESTION # 107
Which of the following statements describe calculated fields? (select all that apply)
- A. Calculated fields can be used in the search bar.
- B. Calculated fields can only be applied to host and sourcetype.
- C. Calculated fields can be based on an extracted field.
- D. Calculated fields are shortcuts for performing calculations using the eval command.
Answer: C,D
Explanation:
Reference:
https://docs.splunk.com/Documentation/Splunk/8.0.3/Knowledge/definecalcfields
NEW QUESTION # 108
......
Genuine SPLK-1002 Exam Dumps Free Demo Valid QA's: https://www.torrentvalid.com/SPLK-1002-valid-braindumps-torrent.html
Printable & Easy to Use Splunk Core Certified Power User SPLK-1002 Dumps 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1KG_ul-70l51AQXNtBLUlGgYafDjH6ZdV