Citrix 1Y0-440 Value Pack (Frequently Bought Together)

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss requirements during the design discussion for a Citrix ADC design project. Specifically, the existing Citrix ADC Configuration must be modified to meet the following authentication conditions:
* Provide users with domain drop-down page
* If the users select workspacelab.com. perform single factor authentication using LDAP
* It the users select AAATM.COM, perform two factor authentication using LDAP and RADIUS
* If the users select NSI-TEST. COM. perform SAML authentication using ADFS What should the architect use to bind the AAA virtual server to the Citrix Gateway virtual server?

• A. 302 based redirect
• B. Form based binding
• C. 401 based binding
• D. Authentication Profile

Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The Citrix ADC devices are set up to handle Citrix Gateway. Load Balancing. Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with Citrix Application Delivery Management version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair(s) of Citrix ADC MPX 7500 devices with version 12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these Citrix ADC devices in the infrastructure and set them up to be monitored and managed by Citrix ADC Management and Analytics {Citrix Application Delivery Management).
The following are the requirements that were discussed during the project initiation call:
Citrix Application Delivery Management should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
Configuration on the new MPX devices should be identical to that of MPX 11500 devices.
Configuration changes after the deployment and initial setup should be optimized using Citrix Application Delivery Management.
Citrix Application Delivery Management should be utilized to configure templates that can be utilized by the Workspacelab team in future deployments.
As per the requirement from the Workspacelab team, Citrix Application Delivery Management should store the audited data for only 15 days.
However, the architect is NOT able to view any Information under Analytics. What should the architect do to fix this issue?

• A. Use nsconfig from MPX 11500 devices and copy the same config to MPX 7500 devices.
• B. Use configuration jobs to replicate the entire configuration from MPX 11500 Instance to MPX 7500 devices.
• C. Use Public Stylebooks and templates to configure the new MPX 11500 devices.
• D. Use Inbuilt Stylebooks and templates to configure the new MPX 11500 devices.

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for a Citrix ADC design project:
All three (3) Workspacelab sites (DC NDR and DR) will have similar Citrix ADC configurations and design Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode GSLB should resolve both A and AAA DNS queries.
In the GSLB deployment the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS the replies should be sent back through the same path On the internal Citrix ADC. both front-end VIP and back-end SNIP will be part of the same subnet USIP is configured on the DMZ Citrix ADC appliances The external Citrix ADC will act as default gateway for back-end servers.
All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode Which design decision must the architect make to meet the design requirements above?

• A. The SNIP of the internal Citrix ADC must be configured as the default gateway on the back-end servers.
• B. Interface 0/1 must be used for DNS traffic
• C. Mac Based Routing must be configured on the External Citrix ADC
• D. The SNIP of the external Citrix ADC must be configured as default gateway on the back-end servers
• E. ADNS service must be used with IPv6 address

Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider). The design requirements for SAML setup are as follows:
NetScaler must be deployed as the Identity Provider (IDP).
ShareFile server must be deployed as the SAML Service Provider (SP).
The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.
The User ID must be UserPrincipalName.
The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO-ADS-001 and SFO-ADS-002.
After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.
Single Sign-on must be performed.
SHA 1 algorithm must be utilized.
The verification environment details are as follows:
Domain Name: workspacelab.com
NetScaler AAA virtual server URL https://auth.workspacelab.com
ShareFile URL https://sharefile.workspacelab.com
Which SAML IDP action will meet the design requirements?

• A. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2 -assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName sharefile.workspacelab.com -signatureAlg RSA-SHA1 -digestMethod SHA1 -encryptAssertion ON -serviceProviderID sharefile.workspacelab.com
• B. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2 -assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName sharefile.workspacelab.com -signatureAlg RSA-SHA256 -digestMethod SHA256 -serviceProviderID sharefile.workspacelab.com
• C. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2 -assertionConsimerServiceURL "https://auth.workspacelab.com/samIIssueName auth.workspacelab.com -signatureAlg RSA-SHA256-digestMethod SHA256-encryptAssertion ON -serviceProviderUD sharefile.workspacelad.com
• D. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2 -assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName auth.workspacelab.com -signatureAlg RSA-SHA1-digestMethod SHA1 -encryptAssertion ON -serviceProviderID sharefile.workspacelab.com

Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version 12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.
The following are the requirements that were discussed during the project initiation call:
NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
Configuration on the new MPX devices should be identical to MPX 11500 devices.
Configuration changes after the deployment and initial setup should be optimized using NMAS.
NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
As per the requirement from the Workspacelab team, NMAS should be store the audited data for only 15 days.
Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?

• A. Under Configuration jobs; Configuration Audit and Advice should be used prior to deployment.
• B. Under Stylebooks; Inbuilt and composite stylebook templates should be utilized prior to deployment.
• C. Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.
• D. Under Stylebooks; Public and composite stylebook templates should be utilized prior to deployment.